Point Schedule
Control scheduled sensor pointing
Syntax
Point <SensorObjectPath> Schedule {ScheduleOption} [<MethodData>]
Related commands
- Point 3DModel
- Point AlongVector
- Point External
- Point Fixed
- Point FixedInRef
- Point GrazingAlt
- Point Spinning
- Point Targeted
Description
The Point Schedule command allows you to schedule a sensor to point at a specific location at a specific time.
{ScheduleOption} | <MethodData> | Description |
---|---|---|
On | N/A | Point the sensor based on schedule intervals. |
Off | Turn off schedule pointing. | |
Clear | Clear all schedule intervals. | |
AddLLA | {StartTimeValue} [{StopTimeValue}] <Lat> <Lon> <Alt> | Point at either a specified Lat, Lon, Alt position or a specified Azimuth/Elevation position, at specified times.
If no {StopTimeValue} is specified, the stop time of the interval will be set to either a succeeding {StartTimeValue} or the end of the scenario time period. For valid {StartTimeValue} and {StopTimeValue} values see Time Options. |
AddAzEl | {StartTimeValue} [{StopTimeValue}] <Azimuth> <Elevation> |
If the {ScheduleOption} is AddAzEl or AddLLA, you should also send the Point Scheduled On command to display sensor graphics in the 2D Graphics window.
Examples
To schedule the Horizon sensor to point from 11p.m. to the end of the scenario time period on 1 November 2000:
Point */Satellite/Shuttle/Sensor/Horizon Schedule AddLLA "1 Nov 2000 23:00:00.00" -33.17 -70.08 0.36
To turn schedule pointing on:
Point */Satellite/Shuttle/Sensor/Horizon Schedule On
Return message
Group membership
This command belongs to the following group(s):
Version
10