Description | Example | Return message | Group

SEET Radiation (Scenario)

Specify SEET radiation options.

Syntax

SEET <ScenarioPath> Radiation {RadOptions}

Related commands

Description

The following table describes the options available for setting Scenario radiation parameters.

{RadOptions}Description
CrresProtonActivity {Quiet | Active}Specify the CRRES proton activity.
CrresRadiationActivity {Quiet | Active | Average}Specify the CRRES radiation activity.
NasaActivity {SolarMin | SolarMax}Specify the NASA model activity level.
NASAEnergyList {UseDefault | {Electron | Proton} [Clear] {EnergyOptions}}Specify the energy list values. The table below describes the {EnergyOptions}.

The Clear option, if entered, removes all energy values. However, since the energy list can not be empty, at least one Add {EnergyOptions} value is expected to be found following the Clear keyword.

The following table describes the {EnergyOptions} used with the NASAEnergyList command.

{EnergyOptions}Description
Add [CRRES | <Value>]Specify CRRES to add all CRRES energy values.

Specify <Value> to add the specific value to the energy list. <Value> is entered in MeV. Electron energies must be between 0.04 and 7.0 MeV; proton energies must be between 0.1 and 400.0 MeV.

Remove [CRRES | nonCRRES | <Value>]Specify CRRES to remove all CRRES energy values.

Specify nonCRRES to remove all energy values that are not supported by CRRES.

Specify <Value> to remove a specific value from the energy list.

Examples

To use the default NASA energy list:

SEET * Radiation NASAEnergyList UseDefault

To clear proton energies from the list and add new values:

SEET * Radiation NASAEnergyList Proton Clear Add .12 Add 2.2 Add 3.3 Add 4.4

Return message

Group membership

This command belongs to the following group(s):

Scenarios

Version

9.1