TE_Mapping
Load a *.tedm file into T&E.
Syntax
TE_Mapping <ObjectPath> Import File "<FilePath>"
Related commands
Description
The T&E Tool Kit Plugin must be installed in order to use this command.
The TE_Mapping command will read any new mappings and add them to the current scenario. The "<FilePath>" must be a full path to a T&E mappings file.
The following table describes the parameters for the Export option. The Filter parameters are optional.
| <Parameters> | Description |
|---|
Examples
Return message
Group membership
This command belongs to the following group(s):
You can use TETK Connect commands in TETK scenarios for pre-flight planning, post-flight analysis, and to support analysis workflows.
You should not use TETK Connect commands when real-time propagators are creating STK vehicles and using STK features instantaneously. The use of Connect commands in a real-time application requires more computational power than STK can support.
TETK functionality that is commonly referred to as "real-time" is actually an offline analysis mode. In this mode, an STK/TETK scenario is prepared with data that is streamed to a particular time in a mission. The post-flight analysis can be prepared again on demand throughout the mission for the data for each time of request. You can use TETK Connect commands in these scenarios.
Version
11.6