TE_TrackTruthMatch_RM
Retrieve the results of a Track Truth workflow.
Syntax
TE_TrackTruthMatch_RM * Results Name "<Name>" AnalysisObject "<Name>"
Related commands
Description
The T&E Tool Kit Plugin must be installed in order to use this command.
The Track Truth Matching workflow involves a smart filter comparing the track points to an actual flight path. The TrackTruthMatch_RM command retrieves the number of passing/failing points. It returns a comma-separated string of Track Name, Track Id, Pass Count, and Fail Count per Track Id.
Name "<Name>" specifies the name of the contour. This parameter is required.
AnalysisObject "<Name>" is the name of the analysis object. This parameter is required.
Examples
Return message
Group membership
This command belongs to the following group(s):
You can use TETK Connect commands in TETK scenarios for pre-flight planning, post-flight analysis, and to support analysis workflows.
You should not use TETK Connect commands when real-time propagators are creating STK vehicles and using STK features instantaneously. The use of Connect commands in a real-time application requires more computational power than STK can support.
TETK functionality that is commonly referred to as "real-time" is actually an offline analysis mode. In this mode, an STK/TETK scenario is prepared with data that is streamed to a particular time in a mission. The post-flight analysis can be prepared again on demand throughout the mission for the data for each time of request. You can use TETK Connect commands in these scenarios.
Version
12.2