Description | Example | Return message | Group

Units_Get

List the current units of measure.

Syntax

Units_Get <ScenarioPath> {Option} [Abbreviation]

Related commands

Description

Get the current units of measure being used for entering data via the user interface, displaying data in reports or entering data via Connect.

The Abbreviation parameter will return the unit abbreviations rather than unit names. This parameter is valid for the following Options: GUI, Report, Connect, ConnectReport, and Internal.

{Option}Description
GUIReturn the units of measure used for entering data via the graphical user interface.
ReportReturn the units used when generating and displaying reports from the graphical user interface.
ConnectReturn the units specific to Connect that are used when entering Connect commands. The only valid dimensions for Connect units are: Distance, Time, Date, Latitude, and Longitude.
ConnectReportReturn units used when generating and displaying reports during the current Connect session. These units will only be used if the ConnectReportUnitsFlag has been set to On.
InternalReturns the internal unit values for all dimensions. These are common throughout STK.
ConnectReportUnitsFlagReturns the current value of the ConnectReportUnitsFlag.
UnitNames <Dimension>Returns the list of valid unit names and abbreviations for the specified dimension. This will return: UnitName, UnitAbbreviation

Examples

To get the unit values currently being used by the graphical user interface:

Units_Get * GUI

Return message

Returns the dimension name and the unit currently being used.
Distance Kilometers; Time Seconds; Date GregorianUTC; Angle Degrees; Mass Kilograms; Power dBW; Frequency Gigahertz; SmallDistance Meters; Latitude Degrees; Longitude Degrees; Duration Hr:Min:Sec; Temperature Kelvin; SmallTime Seconds; Ratio Decibel; Rcs Decibel; ... SpectralBandwidth Hertz; Bits MegaBits; MagneticField nanoTesla;

Examples

To get the valid unit names and abbreviations for the Mass dimension:

Units_Get * UnitNames Mass

Return message

Kilograms, kg Pounds, lb Slug, slug Milligrams, mg Grams, g

Examples

To get the unit names being used by Connect:

Units_Get * Connect

Return message

Distance Meters; Time Seconds; Date GregorianUTC; Latitude Degrees; Longitude Degrees;

To get the unit abbreviations being used by Connect:

Units_Get * Connect Abbreviation

Return message

Distance m; Time sec; Date UTCG; Latitude deg; Longitude deg;

Group membership

This command belongs to the following group(s):

Scenarios

Version

11.2