VO Contours
Display contour levels in a 3D window for Comm and Radar objects.
Syntax
VO <ObjectPath> Contours {On | Off}
Related commands
Description
Use the VO Contours command to turn on and off the display of contour levels in the 3D window.
The Gain contour levels can be shown for antenna, radar, receiver, and transmitter objects, and EIRP, Flux Density, Spectral Flux Density, and RIP contour levels can be shown for radar and transmitter objects.
To actually set the contours that display in the 3D window, use the Graphics Contours (Comm & Radar) command.
Examples
To turn off the display of contours for the rdr2 Radar:
VO */Satellite/EST56/Radar/rdr2 Contours Off
To display contours for Receiver1 attached to Facility1 in the 3D window:
VO */Facility/Facility1/Receiver/Receiver1 Contours On
To display contours for Antenna1:
VO */Ship/TestShip1/Antenna/Antenna1 Contours On
Return message
Group membership
This command belongs to the following group(s):
Version
11.4