Graphics Contours (Comm & Radar)
Set generic contour options for a receiver, transmitter, radar or antenna
Syntax
Graphics <ObjectPath> Contours {ContourType} {ShowGfxState} {RelMaxState}
Related commands
Description
Use the Graphics Contours command to set generic contour options for a receiver, transmitter, radar or antenna.
For Receivers and Antennas the only valid value for {ContourType} is Gain.
For Transmitters and Radar valid values for {ContourType} are Gain, EIRP, FluxDensity, SpectralFluxDensity or RIP.
For {ShowGfxState} and {RelMaxState}, valid values are On or Off. If {RelMaxState} is set to On, then contour level values are assumed to be relative to the maximum value.
Once you've set the {ContourType} and its associated parameters, use the Graphics Levels (Comm & Radar) command to set the contour levels to display on the Map.
Examples
To set the graphics properties of the GndRcvr receiver so that gain contour graphics appear, the relative to maximum flag is Off:
Return message
Group membership
This command belongs to the following group(s):
Version
11