WinMedia3d
Set Windows Media WebCast options for the 3D graphics window.
Syntax
WinMedia3d <ScenarioPath> {WinMediaOptions}
Description
The WinMedia3d Connect command is used to set the Windows Media WebCast options for doing live broadcasts of STK 3D Graphics windows using the WebCast tool and the Windows Media Player.
| {WinMediaOptions} | Description |
|---|---|
| Enabled {Yes | No} | Enable streaming for this window. |
| OnAnimateOnly {Yes | No} | If turned on this will send data to the connected clients, only when animating. |
| MaxClients <NumClients> | Indicates the maximum number of clients that can be connected to the stream. <NumClients> is greater then 0 |
| BitRate <BitRate> | Rate of stream. The higher the bitrate, the higher the quality. <BitRate> is greater then 0 |
| Quality <Quality> | Use to maximize image quality. <Quality> is between 0 and 100 |
| SecPerKey <SecPerKey> | Indicates the number of frames that are sent between key frames. <SecPerKey> is greater then 0 |
| FPS <FPS> | Specifies the number of frames per second that are transmitted during streaming. <FPS> is greater then 0 |
| Port <Port> | For each streamed window, a different port must be specified. <Port> is greater then 0 |
| WindowID <WinNumber> | The id of the 3d graphics window to be streamed. |
Examples
Enable 3d graphics window 1 for streaming during animate only, with a bit rate of 45000:
WinMedia3d * Enabled Yes OnAnimateOnly yes BitRate 45000 WindowID 1
Return message
Group membership
This command belongs to the following group(s):
Version
6.1