Set the altitude and return the minimum width value.
MissionModeler_RM <AircraftObjPath> Procedure <Index> GetValue SetAltComputeMinWidth <Altitude> <AltUnit> [<Unit>]
This method will set the holding altitude to the value entered, and then compute the minimum width.
| <Index> | Enter the index of the procedure. |
| <Altitude> | Specify the altitude for which the minimum width is to be computed. |
| <AltUnit> | Specify the unit that the <Altitude> value is entered in. The dimension type is MissionModelerAltitude. |
| [<Unit>] | Specify the unit that the minimum width value is returned in. This parameter is optional, the default unit is meters (m). The dimension type is MissionModelerDistance. |
For valid results the mission must be calculated before sending this command (for more information see MissionModeler). To calculate the mission send the following commands:
MissionModeler_RM <AircraftObjPath> ConfigureAll
MissionModeler_RM <AircraftObjPath> CalculateAll
MissionModeler_RM <AircraftObjPath> SendNtfUpdate
A real value indicating the minimum width, in the unit specified or in meters.
MissionModeler_RM */Aircraft/Aircraft1 Procedure 2 GetValue SetAltComputeMinWidth 21000 ft
MissionModeler_RM */Aircraft/Aircraft1 Procedure 2 GetValue SetAltComputeMinWidth 21000 ft ft
STK Programming Interface 11.0.1