Description | Example | Return Message | Group

RCS_R

Return the RCS value for an object

Syntax

RCS_R <ObjectPath> <Frequency> [<IncidentAz> <IncidentEl> <ReflectedAz> <ReflectedEl>]

Related Commands

Description

Return the RCS value in square meters, based on frequency and, if applicable, incident and reflected angles.

<Frequency> is entered in the Scenario Frequency units. Valid values are 0.003 GHz to 300.0 GHz.

All remaining values are entered in Degrees. Valid values for <IncidentAz> and <ReflectedAz> are -360 to 360 degrees. Valid values for <IncidentEl> and <ReflectedEl> are -90 to 90 degrees.

Example

Return the RCS value for Facility1, where the frequency is 75.0 GHz:

RCS_R */Facility/Facility1 75.0

Return the RCS value for Satellite1, for the frequency of 75.0 GHz and the specified incident and reflected angles:

RCS_R */Satellite/Satellite1 75.0 45 10 45 84

ReturnMessage

Sample return message for the RCS_R Connect command
ACK
8.044444

Group Membership

This command belongs to the following group(s):

Facilities, Places & Targets

Scenarios

Vehicles

Version

8.0

STK Programming Interface 11.0.1