Add jammer objects to a radar (Deprecated Command)
Radar <RdrObjectPath> Jammers {Add | Remove} {All | <JammerPath>}
Note: This command was deprecated in STK 10.1, it should no longer be used. This command has been replaced by the Radar command.
The Radar Connect commands were enhanced in STK 10.1 to make use of attributes and to simplify the format required to use these commands. For more information on using the new format see Transitioning to the New Radar Format.
Use the Radar Jammers command to add jammer objects to or remove jammer objects from a radar.
If Add is entered, then you must specify <JammerPath>.
If Remove is entered, then either enter All to remove all jammers from the radar or specify <JammerPath> to remove a single jammer.
<JammerPath> is a truncated object path. For more info about STK path types see Common Options.
To add Satellite1/Xm2 transmitter (entered as a truncated path) as a jammer to TestRadar:
Radar */Facility/Customer/Radar/TestRadar Jammers Add Satellite/Satellite1/Transmitter/Xm2
To remove all jammers from TestRadar:
Radar */Facility/Customer/Radar/TestRadar Jammers Remove All
If activated, Connect returns an acknowledgement message.
This command belongs to the following group(s):
10.1
STK Programming Interface 11.0.1