SetAzElMask (Facility, Place & Target)

Set the azimuth-elevation mask for a facility, place or target

Syntax

SetAzElMask <ObjectPath> {UseOption} ["<FilePath>"]

Description

Use the SetAzElMask command to control the display of azimuth-elevation mask data for a facility, place or target. Valid values for {UseOption} are Terrain, MaskFile and None.

If {UseOption} is MaskFile then also specify the AzEl Mask "<FilePath>".

Specify None as the {UseOption} to turn Off terrain or mask information currently being used.

Example

To set the azimuth-elevation mask for the Santiago facility using an external mask file:

SetAzElMask */Facility/Santiago MaskFile "C:\stk\User\Coverage\SantiagoMask.aem"

To turn off the az el mask:

SetAzElMask */Facility/Santiago None

To use terrain to define the AzEl mask:

SetAzElMask */Facility/Santiago Terrain

ReturnMessage

If activated, Connect returns an acknowledgement message.

Group Membership

This command belongs to the following group(s):

Facilities, Places & Targets

Version

10

STK Programming Interface 11.0.1