IAgSnEOIRBand Interface for defining the
individual band properties.
BandName |
The name of the band. |
BitDepth |
The number of bits to encode the digital signal with. |
CalculatingParameters |
Flag to set if input parameters are currently being calculated and entered into the object model |
DarkCurrent |
The dark current noise rate from the detectors in electrons-per-second-per-detector. |
DetectorFillFactor |
The effective fill factor of photosensitive surface area to the total detector surface area. |
DetectorFullWellCapacity |
The full-well capacity of the detectors in electrons-per-detector. |
DynamicRange |
The ratio of the brightest signal to the noise floor. |
DynamicRangeMode |
Unlimited allowing pixels to measure any amount of radiant signal without limit or Simulate Saturation where pixels can only measure up to the specified saturation level of radiant signal. |
EffFocalL |
The effective focal length of the current sensor band. |
EntrancePDia |
Diameter of the single lens equivalent optical prescription. |
Fnumber |
The F-Number ratio of the system, the effective focal length divided by the clear aperture diameter for this sensor band. |
HighBandEdgeWL |
The cut-off spectral wavelength of the current sensor band. |
HorizontalHalfAngle |
Half the horizontal angular extent of the rectangular EOIR sensor bands field-of-view. |
HorizontalIFOV |
The horizontal angular extent of a single individual pixels field-of-view for this sensor band. |
HorizontalPixels |
The number of pixels or samples distributed evenly across the horizontal dimension of the rectangular EOIR sensor bands focal plane. |
HorizontalPP |
The spacing between pixels or samples along the horizontal dimension of the rectangular EOIR sensor bands focal plane. |
ImageQuality |
Discrete level of optical image quality. Aberrations are modeled based on a RMS wavefront error. |
IntegrationTime |
The time interval over which radiant signal is collected before generating an image. |
LongDFocus |
The amount of defocus along the optical axis between the ideal image focal plane and the actual detector focal plane for the current sensor band. |
LowBandEdgeWL |
The cut-on spectral wavelength of the current sensor band. |
NEI |
Noise equivalent irradiance or radiance for the current sensor band. |
NumIntervals |
The number of oversampled spectral intervals to discretely simulate for this sensor band. |
OpticalInputMode |
Optical parameter input mode. |
OpticalQualityDataFile |
Optical quality describing data file. |
OpticalQualityDataFileFrequencySampling |
Optical quality data file frequency sampling. |
OpticalQualityDataFileSpatialSampling |
Optical quality data file spatial sampling. |
OpticalTransmission |
Band effective optical transmission. |
OpticalTransmissionMode |
Optical transmission input mode. |
OpticalTransmissionSpectralResponseFile |
Optical spectral transmission data file. |
QEFile |
Spectral quantum efficiency data file for the detectors. |
QEMode |
Quantum efficiency input mode. |
QEValue |
Band effective detector quantum efficiency. |
QSS |
The quantization step size of the digital output signal. |
QuantizationMode |
Quantization input mode. |
RadParamLevel |
Radiometric parameter input level. |
ReadNoise |
The read noise from the detectors in electrons. |
RenderBand |
Band render flag |
RMSWavefrontError |
The RMS wavefront error of the optical system. |
RSRUnits |
System custom RSR units. |
SaturationMode |
The radiant energy units for saturation and sensitivity, Irradiance better suited for observing point sources or Radiance better suited for resolved images. |
Saturations |
Get the collection of Saturation time-value pairs. |
SEI |
Saturation equivalent irradiance or radiance for the current sensor band. |
Sensitivities |
Get the collection of Sensitivity time-value pairs. |
SimulateQuantization |
Simulate quantization effects of the sensor. |
SpatialInputMode |
Spatial parameter input mode. |
SpectralShape |
Overall system spectral shape designation. |
SystemRelativeSpectralResponseFile |
System relative spectral response file. |
VerticalHalfAngle |
Half the vertical angular extent of the rectangular EOIR sensor bands field-of-view. |
VerticalIFOV |
The vertical angular extent of a single individual pixels field-of-view for this sensor band. |
VerticalPixels |
The number of pixels or samples distributed evenly across the vertical dimension of the rectangular EOIR sensor bands focal plane. |
VerticalPP |
The spacing between pixels or samples along the vertical dimension of the rectangular EOIR sensor bands focal plane. |
Wavelength |
The wavelength in the sensors spectral band to use for diffraction modeling calculations. |
WavelengthType |
The relative position within the sensors spectral band to use as the reference wavelength for diffraction modeling calculations. |


~266.gif)



~266.gif)