TE_QuickLooks
Generate and modify graphics for QuickLooks
Syntax
TE_QuickLooks <ScenarioPath> {Create | Set | Graph | GraphMulti | LinkLine | Vector | Angle | Plane} <Parameters>
Related Commands
Description
The T&E Toolkit Plugin must be installed in order to use this command.
The TE_QuickLooks command with the Create option allows a user to generate the QuickLooks, i.e. create the scalars, between the from and to objects.
The TE_QuickLooks command with the Set option allows a user to set the graphics options for a QuickLooks scalar angle or vector.
The following table describes the parameters for Create option.
| {Option} | <Parameters> |
|---|---|
| From "<ObjectNameOrPath>" | STK Object to start scalar definitions. |
| To "<ObjectNameOrPath>" | STK Object to end scalar definitions. |
The following table describes the parameters for Set option.
| {Option} | <Parameters> |
|---|---|
| Ownship "<ObjectNameOrPath>" | The name of the Ownship. This parameter is required. |
| Name "<Name>" | The name of the scalar. For valid names see the list below. This parameter is required. |
| Color "{Color}" | Set the color of the scalar.
Color may be entered using name, value or %rgb. |
| Show "{On | Off}" | Turn off or on the display scalar in 3D window. |
| ShowLabel "{On | Off}" | Turn off or on the display name of scalar. The default value is Off. |
| ShowValue "{On | Off}" | Turn off or on the display value of scalar. The default value is Off. |
| StartTime "<DateTime>" | Set the start of when to display scalars. "<DateTime>" is entered in ISO-YD date format. StartTime and StopTime must be entered together. |
| StopTime "<DateTime>" | Set the stop of when to display scalar. "<DateTime>" is entered in ISO-YD date format. StartTime and StopTime must be entered together. |
| ClearIntervals | Removes all previously set intervals. |
Scalar must have Show set to On in order to change the ShowLabel or ShowValue values.
The following table describes the parameters for Graph, GraphMulti, and LinkLine options.
| {Option} | <Parameters> |
|---|---|
| Ownship "<ObjectNameOrPath>" | The name of the Ownship. This parameter is required. |
| Name "<Name>" | The name of the scalar.
For GraphMulti and LinkLine enter the name of the To "<ObjectNameOrPath>". For Graph see list below. This parameter is required. |
| Interval "<Value>" . | Specify the name of a time constraint. |
The following list describes the valid Names for Set and Graph options, the name must include the To or From "<ObjectNameOrPath>" where indicated.
- BodyAspectTo<ToName>
- BodyElevationTo<ToName>
- NorthAzimuthTo<ToName>
- NorthElevationTo<ToName>
- AzimuthFrom<FromName>
- ElevationFrom<FromName>
- BodyAspectTo<ToName>180To180
- NorthAzimuthTo<ToName>180To180
- AzimuthFrom<FromName>180To180
The following table describes the parameters for Angle, Vector, and Plane options.
| {Option} | <Parameters> |
|---|---|
| Ownship "<ObjectNameOrPath>" | The name of the Ownship. This parameter is required. |
| Name "<Name>" | The name of the angle, plane, or vector component.
For Angle valid values are: BodyAzimuth, BodyElevation, NorthAzimuth, NorthElevation For Plane valid values are: BodyXY, NorthXY For Vector valid values are: Range, North, BodyX |
| Show {On | Off} | Turn off or on the display scalar in 3D window.
The On or Off value must be in quotes. |
| Target "<Name>" | Specify the name of the To object. |
Example
TE_QuickLooks * Create from "AF385" to "Target1"
TE_QuickLooks * Set Ownship "AF385" Name "BodyAspectToTarget1" Show "ON" Color "Red" ShowLabel "ON" ShowValue "ON" StartTime "29 Oct 2013 15:35:00" StopTime "29 Oct 2013 16:12:36"
TE_QuickLooks * Graph Ownship "AF385" Name "BodyAspectToTarget1"
TE_QuickLooks * GraphMulti Ownship "AF385" Name "Target1"
TE_QuickLooks * LinkLine Ownship "AF385" Name "Target1"
TE_QuickLooks * Angle Ownship "AF385" Target "Target1" Name "BodyAzimuth" Show "ON"
TE_QuickLooks * Vector Ownship "AF385" Target "Target1" Name "Range" Show "ON"
TE_QuickLooks * Plane Ownship "AF385" Target "Target1" Name "NorthXY" Show "ON"
ReturnMessage
Group Membership
This command belongs to the following group(s):
Version
11.6