Description | Example | Return Message | GroupTE_Track
Add or promote a Track
Syntax
TE_Track <ScenarioPath> {Add | Promote | Point | Label} <Parameters>
Related Commands
Description
The T&E Toolkit Plugin must be installed in order to use this command.
The TE_Track command with the Add option allows you to create a T&E Track Workflow and associated STK MTO object.
The TE_Track command with the Promote option allows you to promote a T&E Track Workflow and associated STK MTO object to an STK Aircraft.
The TE_Track Points and Labels commands control the visual representation of the sensor measured MTO track data in the STK 3d Graphics view.
The following table describes the parameters for the options.
| Option | <Parameters> |
|---|
| Add | | Name "<TrackName>" | The display name of the track | | AnalysisObject "<AnalysisObjectName>" | The name of the Ownship that contains the data to the track. | | Mapping "<MappingName>" | The mapping name to use to create the track. | | PickMapping "<PickMappingName>" | Optional. The pick mapping name to use to display results when you click on the track. | | TrackIDs "<CommaSepTrackIDs>" | Optional. A comma separated list of the integer Track IDs that should be displayed. If not entered, all Track IDs will be displayed. | | TimePath "<PathToTimeInterval>" | Optional. The STK path to a Time Interval component that the track should be limited to. | | Reader "<ReaderName>" | Optional. The name of the reader for the file from which the data should be read. The name can be found on the Data Import GUI. This parameter is only needed when more than one file has the same TSPI mapping |
|
| Promote | Name "<TrackName>" Enter the display name of the track that should be promoted. |
| Points | | Name "<TrackName>" | The display name of the track | | Show {On | Off} | Indicate whether to show the points. | | ColorDisplayType "{Static | Dynamic}" | Type of display. | | ColorContourType "{Smooth | Threshold | Unique}" | Type of contour. | | SetParameter "<ParamName>" | Enter the name of the parameter for the point. | | MinColor "{Color}" | The minimum contour color. Valid if ColorContourType is Smooth. | | MaxColor "{Color}" | The maximum contour color. Valid if ColorContourType is Smooth. | | InsideColor "{Color}" | The color inside the threshold. Valid if ColorContourType is Threshold. | | OutsideColor "{Color}" | The color outside the threshold. Valid if ColorContourType is Threshold. | | MinValue "<Value>" | With the MaxValue option specify a point value range for generating a color ramp with MinColor and MaxColor values. | | MaxValue "<Value>" | With the MinValue option specify a point value range for generating a color ramp with MinColor and MaxColor values. | | UniqueValues "<value>,<color>,{icon},..." | Specify the color and icon to use for specific Track values. <value>,<color>,{icon} can be entered multiple times within the double quotes. Valid values for {icon} include Circle, Point, Plus, Star, Square, Triangle. Valid if ColorContourType is Unique. | | Units "{UnitAbbrev}" | Specify the units that MinValue, MaxValue and UniqueValues are entered in. |
|
| Labels | | Name "<TrackName>" | The display name of the track | | Show {On | Off} | Indicate whether to show the labels. | | SetColor "{Color}" | Set the label color. | | SetParameter "<ParamName>" | Enter the name of the parameter that the label is displaying. | | SignificantDigits "<Value>" | Enter number of decimals places to display. | | MaxDisplayAlt "<Value>" | The maximum altitude difference between the camera and the point at which the point's label should display. | | MaxDisplayUnit "{UnitAbbrev}" | The unit that the MaxDisplayAlt value is entered in. |
|
Example
To create a T&E Track Workflow and associated STK MTO object:
TE_Track * Add Name "MyTrack" AnalysisObject "My_Ctdf_Aircraft" Mapping "MeasuredDroneDataMapping" PickMapping "DronePickMapping" TrackIDs "1,2" TimePath "Aircraft/My_Ctdf_Aircraft AvailabilityTimeSpan"
To promote a T&E Track Workflow and associated STK MTO object to an STK Aircraft:
TE_Track * Promote Name "MyTrack"
TE_Track Points example:
TE_Track * Points Name "MyTrack" Show "On" ColorDisplayType "dynamic" ColorContourType "smooth" SetParameter "Magnitude" MinColor "red" MaxColor "blue" MinValue "0" MaxValue "100"
TE_Track Labels example:
TE_Track * Labels Name "MyTrack" Show "On" SetColor "red" SetParameter "Magnitude" SignificantDigits "2" MaxDisplayAlt "10" MaxDisplayUnit "km"
Specify unique values for a TE_Track Points command:
TE_Track * Points Name "MyTrack" ColorDisplayType "dynamic" ColorContourType "unique" SetParameter "Magnitude" Units "km" UniqueValues "1.1,Green,Plus,2.5,Red,Square,3,Blue,Circle"
ReturnMessage
Group Membership
This command belongs to the following group(s):
T & E Toolkit
Version
11.3