TE_TimeComponent
Create one of four types of Time Components.
Syntax
TE_TimeComponent <ObjectPath> {Type} Name "<Name>" AnalysisObject "<Name>" <Parameters>
Related Commands
Description
The T&E Toolkit Plugin must be installed in order to use this command.
The TE_TimeComponent command generates a time instance or interval on the STK Timeline. The time values are shown on the 3D Window.
Valid values for {Type} are ManualTimes, ManualIntervals, MetricIntervals, and MetricInstance.
Name "<Name>" is the name of the time component. This parameter is required.
AnalysisObject "<Name>" is the name of the analysis object. This parameter is required.
The following table describes the parameters that are valid for any {Type}.
| <Parameters> | Description |
|---|---|
| Label "<Label>" | The text for the label. |
| Icon "<FilePath>" | The full file path of the icon. |
| Annotation "<Text>" | The text for the annotation. |
The user must specify either an icon, label, or both. Annotation is optional.
The following table describes the parameters for the ManualTimes option.
| <Parameters> | Description |
|---|---|
| ManualTimes <Time1>,<Time2> | Enter two comma separated times. |
The following table describes the parameters for the ManualIntervals option.
| <Parameters> | Description |
|---|---|
| ManualIntervals <Time1>,<Time2> | Enter two comma separated times. |
| Start {On | Off} | Default is On. |
| Stop {On | Off} | Default is On. |
The following table describes the parameters for the MetricInstance option.
| <Parameters> | Description |
|---|---|
| MetricInstance <Value> | Enter a value, unit. |
| DataElement "<DataElement>" | The name of a data element for the <Value>. See below for format of <DataElement>. |
| TimeConstraint <Constraint> | Enter the name of a time constraint. This parameter is optional. |
The following table describes the parameters for the Metric Interval option.
| <Parameters> | Description |
|---|---|
| Metric Interval <Time1>,<Time2> | Enter a comma separated pair of values and a unit (value, value, unit). |
| DataElement "<DataElement>" | Enter the name of the data element. See below for format of <DataElement>. |
| TimeConstraint <Constraint> | Enter the name of a time constraint. This parameter is optional. |
The format for specifying <DataElement> is: "[<SourceName> |] <ShortName>". If the <ShortName> is enough to identify the element then just enter that. Otherwise, include the <SourceName> followed by the | (bar), before the <ShortName>. Refer to examples of each below.
Example
TE_TimeComponent * Add Name "Comp1" AnalysisObject "AF385" ManualTimes 29 Oct 2014 15:23.500,29 Oct 2014 15:33.500 Label "a" Icon "c:\Temp\redPointer.png" Annotation "here lies trouble"
TE_TimeComponent * Add Name "Comp2" AnalysisObject "AF385" ManualIntervals 29 Oct 2014 15:23.500,29 Oct 2014 15:33.500 Label "b" Icon "c:\Temp\bluePointer.png" Annotation "here lies more trouble" Start On Stop Off
TE_TimeComponent * Add Name "Comp2" AnalysisObject "AF385" Manual Instance 0.613,rad DataElement "Latitude" Label "c" Icon "c:\Temp\greenPointer.png" Annotation "moving up"
TE_TimeComponent * Add Name "Comp2" AnalysisObject "AF385" ManualIntervals 0.613,0.614,rad DataElement "Longitude" Label "d" Icon "c:\Temp\yellowPointer.png" Annotation "moving away"
TE_TimeComponent * Add Name "Component6" AnalysisObject "AF3_0385" MetricInstance -35000 DataElement "AF3_0385_MeasuredTracks_ID.csv [Track3] | NorthWestUp_X" Label "a"
ReturnMessage
Group Membership
This command belongs to the following group(s):
Version
11.6