RFI

Set radio frequency interference options for facilities, ships, aircraft, and ground vehicles.

Syntax

RFI <ObjectPath> {RFIOption} <Parameters>

The RFI command enables you to set radio frequency interference options for analysis purposes. {RFIOption} and <Parameters> can be:

{RFIOption} <Parameters>	Description
TargetObject <TruncObjectPath>	Specify the Target Object. The TargetObject must be a Satellite or Missile.
CenterFrequency <Value>	Enter CenterFrequency in frequency units set at the scenario level. The value must be greater than or equal to 0.
Bandwidth <Value>	Enter Bandwidth in frequency units set at the scenario level. The value must be greater than or equal to 0.
ExclusionHalfAngle <Value>	Enter Exclusion Half Angle in degrees, between -90.0 and 90.0.
Transmit <EIRPValue>	Enter the Transmit EIRP value in dBW.
Receive <PowerValue>	Enter the Receive Power value in dBW.
StartStop {TimeInterval}	Enter times that are within the target object's time period. For valid {TimeInterval} values, see Time Options.
Database "<FilePath>"	Specify the Secondary TLE Database. You can use any file containing GP element data, including TLE files and files containing CCSDS OMM content in XML, KVN, (using file extension .omm), and CSV formats.
RFIDatabase "<FilePath>"	Specify the Radio Frequency Interference Database that contains data on comm assets (receivers and transmitters) attached to satellites with given SSC numbers.
AddVictims {On \| Off} [<NumberToAdd>]	Specify whether to add potential victims to the scenario, and optionally, how many to add.
Compute	Compute the radio frequency interference. Use the Report and Graph commands to view results.

"<FilePath>" for Database or RFIDatabase is the path to a file on your local drive.

RFI */Facility/Santiago CenterFrequency 12.3

RFI */Facility/Santiago ExclusionHalfAngle 33.0 TargetObject Satellite/Satellite2 Transmit 123.4

This command belongs to the following group(s):

12.10