ExtrudedPolylineTriangulatorComputeCartographic Method (CentralBody, IEnumerableCartographic, Double, Double, WindingOrder)

For convenience. Computes an extrusion of positions on the specified centralBody with a constant bottomAltitude and topAltitude using Cartographic positions. Longitude and latitude are in radians, and altitude is in meters. This is equivalent to converting each position in positions to Cartesian and calling Compute(CentralBody, IEnumerableCartesian, Double, Double, WindingOrder)

Namespace: AGI.Foundation.Geometry.Discrete
Assembly: AGI.Foundation.Graphics (in AGI.Foundation.Graphics.dll) Version: 24.3.420.0 (24.3.420.0)

Syntax

C++

Copy

public static ExtrudedPolylineTriangulatorResult ComputeCartographic(
	CentralBody centralBody,
	IEnumerable<Cartographic> positions,
	double bottomAltitude,
	double topAltitude,
	WindingOrder positionsWindingOrder
)

Public Shared Function ComputeCartographic ( 
	centralBody As CentralBody,
	positions As IEnumerable(Of Cartographic),
	bottomAltitude As Double,
	topAltitude As Double,
	positionsWindingOrder As WindingOrder
) As ExtrudedPolylineTriangulatorResult

public:
static ExtrudedPolylineTriangulatorResult^ ComputeCartographic(
	CentralBody^ centralBody, 
	IEnumerable<Cartographic>^ positions, 
	double bottomAltitude, 
	double topAltitude, 
	WindingOrder positionsWindingOrder
)

static member ComputeCartographic : 
        centralBody : CentralBody * 
        positions : IEnumerable<Cartographic> * 
        bottomAltitude : float * 
        topAltitude : float * 
        positionsWindingOrder : WindingOrder -> ExtrudedPolylineTriangulatorResult

Parameters

centralBody: Type: AGI.Foundation.CelestialCentralBody
The central body to compute the extrusion on.
positions: Type: System.Collections.GenericIEnumerableCartographic
The polyline positions that should be extruded.
bottomAltitude: Type: SystemDouble
The extrusion's bottom altitude, in meters, above the ellipsoid.
topAltitude: Type: SystemDouble
The extrusion's top altitude, in meters, above the ellipsoid.
positionsWindingOrder: Type: AGI.Foundation.Geometry.DiscreteWindingOrder
The winding order of positions.

Return Value

Type: ExtrudedPolylineTriangulatorResult
A ExtrudedPolylineTriangulatorResult object representing the extrusion, in the centralBody's fixed reference frame.

Remarks

See Compute(CentralBody, IEnumerableCartesian, Double, Double, WindingOrder) for a full discussion.

Reference

ExtrudedPolylineTriangulator Class

ComputeCartographic Overload

AGI.Foundation.Geometry.Discrete Namespace

ExtrudedPolylineTriangulatorCompute(CentralBody, IEnumerableCartesian, Double, Double, WindingOrder)