TerrainAzimuthElevationMaskCompute Method (TerrainProvider, Double, Double, Cartographic, Int32, Double, Double, ITrackCalculationProgress)

public static AzimuthElevationMask Compute(
	TerrainProvider provider,
	double minimumTerrainHeight,
	double maximumTerrainHeight,
	Cartographic observerPosition,
	int numberOfAzimuthSteps,
	double stepSize,
	double maximumSearchAngle,
	ITrackCalculationProgress tracker
)

Public Shared Function Compute ( 
	provider As TerrainProvider,
	minimumTerrainHeight As Double,
	maximumTerrainHeight As Double,
	observerPosition As Cartographic,
	numberOfAzimuthSteps As Integer,
	stepSize As Double,
	maximumSearchAngle As Double,
	tracker As ITrackCalculationProgress
) As AzimuthElevationMask

public:
static AzimuthElevationMask^ Compute(
	TerrainProvider^ provider, 
	double minimumTerrainHeight, 
	double maximumTerrainHeight, 
	Cartographic observerPosition, 
	int numberOfAzimuthSteps, 
	double stepSize, 
	double maximumSearchAngle, 
	ITrackCalculationProgress^ tracker
)

static member Compute : 
        provider : TerrainProvider * 
        minimumTerrainHeight : float * 
        maximumTerrainHeight : float * 
        observerPosition : Cartographic * 
        numberOfAzimuthSteps : int * 
        stepSize : float * 
        maximumSearchAngle : float * 
        tracker : ITrackCalculationProgress -> AzimuthElevationMask 

Parameters

provider

Type: AGI.Foundation.TerrainTerrainProvider
The source of terrain from which to compute the mask.

minimumTerrainHeight

Type: SystemDouble
The minimum height in meters that can be returned by the TerrainProvider's GetHeightRelativeToShape(Double, Double) method. Setting this value lower than necessary will not affect the results, but it will decrease performance. Setting it too high can cause incorrect results.

maximumTerrainHeight

Type: SystemDouble
The maximum height in meters that can be returned by the TerrainProvider's GetHeightRelativeToShape(Double, Double) method. Setting this value higher than necessary will not affect the results, but it will decrease performance. Setting it too low can cause incorrect results.

observerPosition

Type: AGI.Foundation.CoordinatesCartographic
The planetodetic position of the stationary observer around which the mask is computed.

numberOfAzimuthSteps

Type: SystemInt32
The number of azimuth steps to use to compute the mask.

stepSize

Type: SystemDouble
The size of the step along each azimuth ray, in radians.

maximumSearchAngle

Type: SystemDouble
The maximum angle, in radians, to move along each azimuth ray in constructing the mask.

tracker

Type: AGI.FoundationITrackCalculationProgress
The object to which progress is reported and that is able to cancel this operation before it is complete, or . When reporting progress, the 'additionalInformation' parameter to ReportProgress(Int32, Object) will be .

Return Value

This method works by casting a ray out from the observerPosition in a number of directions to determine the minimum elevation angle that is visible above the terrain in that direction. More specifically, the various distances at which the minimum elevation angle increases in that direction are determined.

Selecting values for numberOfAzimuthSteps, stepSize, and maximumSearchAngle requires making a trade-off between the accuracy of the result and the time to compute it. The ideal values to use depend on the specifics of the problem being solved and the nature of the terrain data employed.

numberOfAzimuthSteps is the number of rays to cast out from the observerPosition in computing the mask. A value of 360 casts a ray for each degree, and is a reasonable value to use. Notice that when a value of 360 is used, the count of elevation masks will be 361 because it contains the elevation for both 0 and 360. The elevation data for 360 copies data from 0 with the exception of the azimuth for efficiency.

stepSize is the distance between steps along the ray, in radians. A reasonable value for this parameter would sample approximately three times per terrain grid cell, or 1/3 of the smallest of DeltaLongitude and DeltaLatitude.

maximumSearchAngle is the maximum angle, in radians, to move along each ray. In other words, this parameter indicates the stopping point for sampling along the ray. A reasonable value will take into account the difference between the maximum and minimum heights of terrain provided by provider and potentially how close together the minimum and maximum heights are located.

Examples

double approximateHeightOfMtEverest = 8850.0;
double semimajorAxisLength = WorldGeodeticSystem1984.Shape.SemimajorAxisLength;
double maximumSearchAngle = Math.Acos(semimajorAxisLength / (semimajorAxisLength + approximateHeightOfMtEverest));

Reference