PointGraphics Properties |
The PointGraphics type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Color |
Gets or sets the color of the point.
If not specified, the default is White.
|
| DisableDepthTestDistance |
Gets or sets the distance from the camera at which to disable the depth test.
This can be used to prevent clipping against terrain, for example.
When set to zero, the depth test is always applied. When set to PositiveInfinity, the depth test is never applied.
If not specified, the default is 0.0.
|
| DistanceDisplayCondition |
Gets or sets the distances from the camera at which this point will be displayed.
If not specified, the point is displayed regardless of camera distance.
|
| HeightReference |
Gets or sets the height reference of the point.
If not specified, the default is None.
|
| OutlineColor |
Gets or sets the outline color of the point.
If not specified, the default is Black.
|
| OutlineWidth |
Gets or sets the outline width of the point, in pixels.
If not specified, the default is 0.0.
|
| PixelSize |
Gets or sets the size of the point.
If not specified, the default is 1.0.
|
| ScaleByDistance |
Gets or sets how the point's scale should change based on the point's distance from the camera.
This scalar value will be multiplied by PixelSize.
If not specified, then the scale does not change based on the camera distance.
|
| Show |
Gets or sets whether or not the point is shown.
If not specified, the default is .
|
| TranslucencyByDistance |
Gets or sets how the point's translucency should change based on the point's distance from the camera.
This scalar value should range from 0 to 1.
If not specified, then the translucency does not change based on the camera distance.
|
See Also