RFI
Set radio frequency interference options for facilities, ships, aircraft and ground vehicles
Syntax
RFI <ObjectPath> {RFIOption} <Parameters>
Description
The RFI command allows you to set radio frequency interference options for analysis purposes. {RFIOption} and <Parameters> can be:
| {RFIOption} <Parameters> | Description |
|---|---|
| TargetObject <TruncObjectPath> | Specify the Target Object. The TargetObject must be a Satellite or Missile. |
| CenterFrequency <Value> | The CenterFrequency is entered in frequency units set at the scenario level. The value must be greater or equal to 0. |
| Bandwidth <Value> | The Bandwidth is entered in frequency units set at the scenario level. The value must be greater or equal to 0. |
| ExclusionHalfAngle <Value> | The Exclusion Half Angle is entered in degrees, and is between -90.0 and 90.0. |
| Transmit <EIRPValue> | The Transmit EIRP value is entered in dBW. |
| Receive <PowerValue> | The Receive Power value is entered in dBW. |
| StartStop {TimeInterval} | Enter times that are within the target object's time period.
For valid {TimeInterval} values see Time Options. |
| Database "<FilePath>" | Specify the Secondary TLE Database. Any file containing GP element data may be used, including TLE files and files containing CCSDS OMM content in XML, KVN, (using file extension .omm), and CSV formats. |
| RFIDatabase "<FilePath>" | Specify the Radio Frequency Interference Database which contains data on comm assets (receivers and transmitters) attached to satellites with given SSC numbers. |
| AddVictims {On | Off} [<NumberToAdd>] | Specify whether to add potential victims to the Scenario, and optionally, how many to add. |
| Compute | Compute the radio frequency interference (use the Report and Graph commands to view results). |
"<FilePath>" for Database or RFIDatabase can be the path to a file on your local drive or the path to a file on an SDF server. See Specifying Paths for "<SDFFilePath>" syntax information.
Examples
To set the center frequency of the Santiago ground station to 123.0 GHz:
RFI */Facility/Santiago CenterFrequency 12.3
To set radio frequency interference options for the Santiago ground station:
RFI */Facility/Santiago ExclusionHalfAngle 33.0 TargetObject Satellite/Satellite2 Transmit 123.4
Return message
Group membership
This command belongs to the following group(s):
Version
11.6