SEET SEP
Specify SEET vehicle solar energetic particles (SEP) options.
Syntax
SEET <VehiclePath> SEP {SEPOptions}
Related commands
- SEET SAAContour
- SEET MagField
- SEET VehTemperature
- SEET ParticleFlux
- SEET Graphics (Vehicle)
- SEET Radiation (Vehicle)
Description
This command is valid for Satellite, Missile & Launch Vehicle.
The following table describes the options available for setting vehicle solar energetic particles parameters.
{SEPOptions} | Description |
---|---|
Model {ModelName} Probability <ProbabilityValue> | Set the model name and probability value for SEP.
Valid values for {ModelName} are: ESP, Rosenqvist, JPL91 <ProbabilityValue< must be between 0 and 100.0. |
AddEnergy {EnergyValue} | Add an energy value to the model. Valid energy values are described in the table below. |
RemoveEnergy {EnergyValue} | Remove an energy value from the model. Valid energy values are described in the table below. |
SetDefaultEnergies | Set all energies to their default list as described in the table below. |
Duration <Value> | Enter the number of years the SEP computation will use.
The value is entered in years between 1.0 and 22.0. |
This command will Nack if you attempt to add an energy that already exists or remove an energy that doesn't exist.
The following table describes the valid energy values for each model. By default the entire list is added to the specified SEP model.
Model | Energies |
---|---|
ESP |
|
Rosenqvist |
|
JPL91 |
Examples
To set SEP parameters for Satellite1:
Return message
Group membership
This command belongs to the following group(s):
Version
10.1.1