VO Annotation DataDisplayArea
Set up the data display area on a 3d window.
Syntax
VO <ScenarioPath> Annotation DataDisplayArea {AnnotationOption}
Related commands
- VO Annotation
- VO Annotation Declutter
- VO Annotation Frame
- VO Annotation Selection
- VO Annotation Time
- VO Annotation ViewerPos
Description
Use the following options to setup and display a static data area on a 3d window. This area will be used to display dynamic textual data.
{AnnotationOption} can be specified in any order, and any number of {AnnotationOption} can be used in a single command.
| {AnnotationOption} | Description |
|---|---|
| Show {On | Off} | Turn on or off the display area. |
| Color {Color} | Sets the background color for the data display area. For valid {Color} options see Common Options. |
| Size <Value> | The size of the area used to display data. The value is entered in pixels and must be greater than 0. |
| Location {Right | Top | Left | Bottom} | Specify where, on the 3D window, the Data Display should appear. |
| LineWidth <Value> | Specify the width of the line that separates the data area from the 3D Graphics display. The value must be between 1.0 and 10.0. |
| WindowID <WinNumber> | The number of the window where you want the data display area. The window number should match the number in the title bar of the 3D Graphics window of interest. |
Examples
To turn on a data display area on the left side of 3d window 1, with a background of gray:
VO * Annotation DataDisplayArea Show On Location Left Color gray30 WindowID 1
To turn off a data display area:
VO * Annotation DataDisplayArea Show Off
To turn on a data display area at the top of the window and a line width of 1:
VO * Annotation DataDisplayArea Show On LineWidth 1 location top
Return message
If activated, Connect returns an acknowledgement message.
Group membership
This command belongs to the following group(s):
Version
6.2