VO Point
Set Point attributes for Vehicles and Facilities.
Syntax
VO <ObjectPath> Point {PointOptions}
Description
Valid {PointOptions} are shown in the following table:
| {PointOptions} | Description |
|---|---|
| Show {On | Off} | Show or Hide points. Defaults to Off. |
| Size <Value> | Set diameter of point in pixels. Value must be greater than 0.0. Default is 5.0. |
Examples
Show Points for Facility1, at a size of 7 pixels:
VO */Facility/Facility1 Point Show On Size 7
Return message
Group membership
This command belongs to the following group(s):
Version
6.1.2