Specify SEET vehicle graphics options.
SEET <VehiclePath> Graphics {MagFieldLine | SAAContour} {GfxOptions}
This command is valid for Satellite, Missile & Launch Vehicle.
The following table describes the options available for setting magnetic field line graphics parameters.
| MagFieldLine {GfxOptions} | Description |
|---|---|
| Show2D {Yes | No} | Specify whether the magnetic field line is shown on the 2D map. |
| Show3D {Yes | No} | Specify whether the magnetic field line is shown on the 3D map. |
| ShowLabel {Yes | No} | Specify whether the L value label is displayed alongside the field line. |
| Color {Color} | Specify the magnetic field line color. For valid {Color} options see Common Options. |
| LineWidth <Width> | Indicate a pixel width value between 1.0 and 10.0 |
| Style {LineStyle} | For valid {LineStyle} options see Common Options. |
The following table describes the options available for setting South Atlantic Anomaly contour graphics parameters.
| SAAContour {GfxOptions} | Description |
|---|---|
| Show2D {Yes | No} | Specify whether the South Atlantic Anomaly contour is shown on the 2D map. |
| Show3D {Yes | No} | Specify whether the South Atlantic Anomaly contour is shown on the 3D map. |
| { VehicleAlt | ConstantAlt [<AltValue>] } | Enter VehicleAlt to specify that the
South Atlantic Anomaly contour be displayed at the vehicle's
altitude.
Enter ConstantAlt to specify that South Atlantic Anomaly contour be displayed at a constant altitude. Optionally, specify the constant altitude value, <AltValue>, in Connect distance units. If <AltValue> is not entered then the last altitude value will be used. |
| Fill {Off | On} | Indicate whether the contour should be filled. |
| FillTranslucency <Value> | Specify the translucency of the contour fill. <Value>should be between 0.0 and 100.0. |
To set magnetic field line graphics parameters for Satellite1:
SEET */Satellite/Satellite1 Graphics MagFieldLine Show3d Yes Color red
To set graphics options for the South Atlantic Anomaly contour for Satellite1:
SEET */Satellite/Satellite1 Graphics SAAContour Show2D on VehicleAlt
SEET */Satellite/Satellite1 Graphics SAAContour ConstantAlt 800.0
SEET */Satellite/Satellite1 Graphics SAAContour Show2D off Show3D On
SEET */Satellite/Satellite1 Graphics SAAContour Fill On FillTranslucency 30.0
If activated, Connect returns an acknowledgement message.
This command belongs to the following group(s):
10.1.1
STK Programming Interface 11.0.1