VO PosDropLine

Display Vehicle position drop lines.

VO <VehObjectPath> PosDropLine Type {WGS84 | Terrain | MSL} {DropLineOption} <Value> [{DropLineOption} <Value>...]

The VO PosDropLine command allows the user to display and set attributes for the vehicle position drop lines.

If Type is MSL, the line will drop from the vehicle to mean sea level.
If Type is Terrain, the line will drop from the vehicle to terrain.
If Type is WGS84, the line will drop from the vehicle to the central body's reference ellipsoid,

At least one of the following {DropLineOption} must also be included on the command line.

{DropLineOption} <Value>	Description
Show {On \| Off}	Hides or shows the position drop lines.
Color {{Color} \| Default}	Set the color of the drop lines. If you specify Default, then the object color is used. For valid {Color} options see Common Options.
LineWidth <LineWidth>	Indicate a pixel width value between 1.0 and 10.0.
LineStyle {LineStyle}	Set the line style for the drop line. {LineStyle} can be a name such as Solid, Dashed, Dotted, etc, or a number 0, 1, 2, etc. For all valid {LineStyle} options see Common Options.

Note: A line may drop "up" if the vehicle has negative altitude.

The following command will create drop lines from the sub to sea level in Orange.

VO */Ship/sub_msl_terrain PosDropLine Type MSL Show On Color Orange Linewidth 3

This command will create drop lines from the sub to the Terrain (i.e. the sea floor) in the sub color.

VO */Ship/sub_msl_terrain PosDropLine Type Terrain Show On Color Default Linewidth 3

If activated, Connect returns an acknowledgement message.

This command belongs to the following group(s):

8.0

STK Programming Interface 11.0.1