GpsCommunicationsFrontEnd Properties

Gets or sets the efficiency of the receiver's antenna, as a ratio between zero and one.

Gets or sets the equivalent noise temperature resulting from effects outside the antenna; galactic noise, Earth's albedo, etc., in kelvin. The default is 75.4 K.

Gets the collection containing the children of this Platform.

Gets or sets the spacing between the early and late correlator peaks, in chips. Typically 0.125-1.0 chips. The default is 0.125 chips.

Gets or sets the bandwidth of the DLL tracking loop, in hertz. Typically 1-18 Hz. The default is 18 Hz.

Gets or sets the time at which the receiver starts receiving signals.

Gets the collection of extensions attached to this object.

Gets or sets the bandwidth of the receiver used to track all signals, in hertz. The default is 2.046 MHz. Note that this default may be modified by the choice of GpsSignalConfiguration specified in the constructor.

Gets or sets a value indicating whether to add GPS signals as interference sources in the front end's communication system.

Gets the list of interfering sources for this GpsCommunicationsFrontEnd. Note that any sources that you add to this list must have the IPlaceHolderService or ISignalTransmissionService available.

Gets or sets a value indicating whether this receiver uses signals from two frequencies.

Gets a value indicating whether this object is frozen. A frozen object cannot be modified and an ObjectFrozenException will be thrown if an attempt is made to do so.

Gets or sets the gain of the Low Noise Amplifier (LNA). The default is 100 (20 dB).

Gets or sets the time-varying location of this platform.

Gets or sets the name of the platform.

Gets a collection of platforms that contain the IGpsPrnService, INavigationTransmitterService and IGpsSatelliteOutageService.

Gets or sets the NoiseFactor this front end uses to calculate noise on the navigation signals. The default value is 1.995... (3 dB).

Gets or sets the time-varying orientation of this platform.

Gets the parent platform of this platform.

Gets or sets the polarization.

Gets or sets the gain of the cabling after the Low Noise Amplifier (LNA). The default is 0.1 (-10 dB).

Gets or sets the gain of the cabling and filtering prior to reaching the Low Noise Amplifier (LNA). The default is 0.7943... (-1 dB).

Gets or sets the front end's antenna gain pattern. The default is a FrpaGainPattern using the default AntennaEfficiency value.

Gets or sets the ambient temperature where the receiver is operating, in kelvin. The default is 290.0 K.

Gets the reference frame of this platform formed by the combination of the platform's location and orientation.

Gets a collection of SignalPropagationModels that define the propagation environment for the GPS signals.

Gets a collection of NavigationSignals that define what each NavigationReceiverChannel will track.