GpsCommunicationsFrontEnd Class

Initializes a new instance with default values.

Initializes a new instance as a copy of an existing instance.

Creates a front end for a GpsReceiver that can be used to model communications between GPS satellites and the GpsReceiver, using a predefined receiver signal configuration.

Creates a front end for a GpsReceiver that can be used to model communications between GPS satellites and the GpsReceiver.

Gets or sets the efficiency of the receiver's antenna, as a ratio between zero and one.

Gets or sets the equivalent noise temperature resulting from effects outside the antenna; galactic noise, Earth's albedo, etc., in kelvin. The default is 75.4 K.

Gets the collection containing the children of this Platform.

Gets or sets the spacing between the early and late correlator peaks, in chips. Typically 0.125-1.0 chips. The default is 0.125 chips.

Gets or sets the bandwidth of the DLL tracking loop, in hertz. Typically 1-18 Hz. The default is 18 Hz.

Gets or sets the time at which the receiver starts receiving signals.

Gets the collection of extensions attached to this object.

Gets or sets the bandwidth of the receiver used to track all signals, in hertz. The default is 2.046 MHz. Note that this default may be modified by the choice of GpsSignalConfiguration specified in the constructor.

Gets or sets a value indicating whether to add GPS signals as interference sources in the front end's communication system.

Gets the list of interfering sources for this GpsCommunicationsFrontEnd. Note that any sources that you add to this list must have the IPlaceHolderService or ISignalTransmissionService available.

Gets or sets a value indicating whether this receiver uses signals from two frequencies.

Gets a value indicating whether this object is frozen. A frozen object cannot be modified and an ObjectFrozenException will be thrown if an attempt is made to do so.

Gets or sets the gain of the Low Noise Amplifier (LNA). The default is 100 (20 dB).

Gets or sets the time-varying location of this platform.

Gets or sets the name of the platform.

Gets a collection of platforms that contain the IGpsPrnService, INavigationTransmitterService and IGpsSatelliteOutageService.

Gets or sets the NoiseFactor this front end uses to calculate noise on the navigation signals. The default value is 1.995... (3 dB).

Gets or sets the time-varying orientation of this platform.

Gets the parent platform of this platform.

Gets or sets the polarization.

Gets or sets the gain of the cabling after the Low Noise Amplifier (LNA). The default is 0.1 (-10 dB).

Gets or sets the gain of the cabling and filtering prior to reaching the Low Noise Amplifier (LNA). The default is 0.7943... (-1 dB).

Gets or sets the front end's antenna gain pattern. The default is a FrpaGainPattern using the default AntennaEfficiency value.

Gets or sets the ambient temperature where the receiver is operating, in kelvin. The default is 290.0 K.

Gets the reference frame of this platform formed by the combination of the platform's location and orientation.

Gets a collection of SignalPropagationModels that define the propagation environment for the GPS signals.

Gets a collection of NavigationSignals that define what each NavigationReceiverChannel will track.

Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).

Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).

Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).

Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).

Clones this object using the specified context.

Computes a hash code based on the current properties of this object. Derived classes MUST override this method and compute a hash code that combines: a unique hash code seed, the base implementation result, and the hash codes of all new fields introduced by the derived class which are used in the CheckForSameDefinition(DefinitionalObject) method.

Enumerates the dependencies of this object by calling EnumerateT(T) for each object that this object directly depends upon. Derived classes which contain additional dependencies MUST override this method, call the base implementation, and enumerate dependencies introduced by the derived class.

Determines whether the specified object is equal to the current object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Freezes this object. Further attempts to modify it will result in an ObjectFrozenException.

Called by Freeze to also freeze any objects that are considered to be a part of this object. Derived classes which contain additional aggregated objects MUST override this method, call the base implementation, and freeze aggregated objects introduced by the derived class. The objects that need to be frozen in this method are frequently created in this object's constructor and are not settable via properties.

Gets the GNSS link budgets for all satellites.

Gets a hash code representing the definition of this object.

Gets the SignalPropagationGraph created by this GpsCommunicationsFrontEnd.

Serves as the default hash function.

Communication-based access query for a single NavigationReceiverChannel which determines access based on all signals defined in the GpsSignalConfiguration.

Gets the collection of NavigationReceiverChannels used in this receiver.

Gets GNSS link budgets for a specific satellite identified by satelliteID. A collection of GnssLinkBudgetScalars containing link budgets for each signal tracked by the receiver's channel.

Gets the service object of the specified type.

Gets the Type of the current instance.

Determines if this object has the same definition as another object.

Creates a shallow copy of the current Object.

Throws ObjectFrozenException if this object IsFrozen. This method should be called from any method or property that modifies this object.

Returns a string that represents the current object.