ConfigurableProfile Class |
A configurable profile is used by the RoutePropagator to ensure that the
route heights and speeds are continuous from one segment to the next.
Inheritance HierarchySystemObject
AGI.Foundation.RouteDesign.AdvancedConfigurableProfile
AGI.Foundation.RouteDesign.AdvancedStaticRouteProfileStaticConfigurableProfile
AGI.Foundation.RouteDesign.AdvancedConfigurableProfile
AGI.Foundation.RouteDesign.AdvancedStaticRouteProfileStaticConfigurableProfile
Namespace: AGI.Foundation.RouteDesign.Advanced
Assembly: AGI.Foundation.RouteDesign (in AGI.Foundation.RouteDesign.dll) Version: 24.3.420.0 (24.3.420.0)
SyntaxThe ConfigurableProfile type exposes the following members.
Constructors| Name | Description | |
|---|---|---|
 | ConfigurableProfile | Initializes a new instance. |
Properties| Name | Description | |
|---|---|---|
 | AllowModificationOfFinalHeight |
Gets a value indicating whether to allow other profiles to modify
the final height of this profile in order to ensure continuity.
|
| AllowModificationOfFinalHeightRate |
Gets a value indicating whether to allow other profiles to modify
the final height rate of this profile in order to ensure continuity.
|
| AllowModificationOfFinalSpeed |
Gets a value indicating whether to allow other profiles to modify
the final speed of this profile in order to ensure continuity.
|
| AllowModificationOfInitialHeight |
Gets a value indicating whether to allow other profiles to modify
the initial height of this profile in order to ensure continuity.
|
| AllowModificationOfInitialHeightRate |
Gets a value indicating whether to allow other profiles to modify
the initial height rate of this profile in order to ensure continuity.
|
| AllowModificationOfInitialSpeed |
Gets a value indicating whether to allow other profiles to modify
the initial speed of this profile in order to ensure continuity.
|
| FinalHeight |
Gets or sets the final height of this profile above the reference surface.
|
| FinalHeightRate |
Gets or sets the final height rate for this profile.
|
| FinalSpeed |
Gets or sets the final speed for this profile.
|
| HeightReferenceSurface |
Gets the reference terrain surface from which the height is measured.
|
| InitialHeight |
Gets or sets the initial height of this profile above the reference surface.
|
| InitialHeightRate |
Gets or sets the initial height rate for this profile.
|
| InitialSpeed |
Gets or sets the initial speed for this profile.
|
| ProfileComputationalWeight |
Gets a scalar value indicating how expensive the configuration of this profile is.
This is used to indicate to the ITrackCalculationProgress instance
fed to the RoutePropagator that certain profiles will take longer than
others (larger computational weight).
|
| TargetFinalHeight |
Gets the final height that this profile will attempt to target. If the parameters
for platform dynamics or the geometry specified for this profile are insufficient to
satisfy the given target, the profile will get as close as it can and then the
surrounding connections will attempt to make up the difference.
|
| TargetFinalHeightRate |
Gets the final height rate that this profile will attempt to target. If the parameters
for platform dynamics or the geometry specified for this profile are insufficient to
satisfy the given target, the profile will get as close as it can and then the
surrounding connections will attempt to make up the difference.
|
| TargetFinalSpeed |
Gets the final speed that this profile will attempt to target. If the parameters
for platform dynamics or the geometry specified for this profile are insufficient to
satisfy the given target, the profile will get as close as it can and then the
surrounding connections will attempt to make up the difference.
|
| TargetInitialHeight |
Gets the initial height that this profile will attempt to target. If the parameters
for platform dynamics or the geometry specified for this profile are insufficient to
satisfy the given target, the profile will get as close as it can and then the
surrounding connections will attempt to make up the difference.
|
| TargetInitialHeightRate |
Gets the initial height rate that this profile will attempt to target. If the parameters
for platform dynamics or the geometry specified for this profile are insufficient to
satisfy the given target, the profile will get as close as it can and then the
surrounding connections will attempt to make up the difference.
|
| TargetInitialSpeed |
Gets the initial speed that this profile will attempt to target. If the parameters
for platform dynamics or the geometry specified for this profile are insufficient to
satisfy the given target, the profile will get as close as it can and then the
surrounding connections will attempt to make up the difference.
|
Methods| Name | Description | |
|---|---|---|
 | ConfigureProfiles |
Configure this profile in relation to the previous and next profile to make sure than
they each connect continuously. Specify the result of the configuration in the output.
|
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object.) |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object.) |
| FreezeFinalConditions |
Called by the RoutePropagator to indicate to the profile that
it should not let other profiles update its final boundary conditions.
|
| FreezeInitialConditions |
Called by the RoutePropagator to indicate to the profile that
it should not let other profiles update its initial boundary conditions.
|
| GetHashCode | Serves as the default hash function. (Inherited from Object.) |
| GetProfileSegment |
Get the time dynamic geometry of the profile after configuration.
|
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object.) |
| ToString | Returns a string that represents the current object. (Inherited from Object.) |
See Also