Click or drag to resize

TakeoffProcedure Class

Represents a takeoff trajectory with respect to a runway surface specified by the underlying terrain. If there is a taxi prior to the runway, the platform will turn onto the runway's heading. Then, the platform rolls a given distance before taking off to reach the target height. Lastly, the platform will execute a level turn toward the next procedure.
Inheritance Hierarchy

Namespace:  AGI.Foundation.RouteDesign
Assembly:  AGI.Foundation.RouteDesign (in AGI.Foundation.RouteDesign.dll) Version: 24.2.419.0 (24.2.419.0)
Syntax
public class TakeoffProcedure : RouteProcedure

The TakeoffProcedure type exposes the following members.

Constructors
  NameDescription
Public methodTakeoffProcedure
Create a new instance with default values. The position of the runway must be set prior to propagation.
Protected methodTakeoffProcedure(TakeoffProcedure, CopyContext)
Initializes a new instance as a copy of an existing instance.
Public methodTakeoffProcedure(Cartographic, Double, Double, ProfileDynamics, Double, Double, Double, Double, Double)
Create a takeoff procedure based on the given parameters with respect to the surface of the Earth. If MeanSeaLevel is available on the definition of Earth in the CalculationContext, the specified heights will be with respect to sea level.
Public methodTakeoffProcedure(Cartographic, Double, Double, Double, Double, Double, Double, Double, Double, Double, Double)
Create a takeoff procedure based on the given parameters with respect to the surface of the Earth. If MeanSeaLevel is available on the definition of Earth in the CalculationContext, the specified heights will be with respect to sea level.
Public methodTakeoffProcedure(TerrainProvider, Double, Double, Double, Double, Double, Double, Double, Double, Double, Double, Double, Double)
Create a takeoff procedure based on the given parameters with respect to a terrain surface.
Top
Properties
  NameDescription
Public propertyClimbAngle
Gets or sets the angle at which to climb during takeoff, in radians. This will override the AscentSpeed.
Public propertyDynamics
Gets or sets the parameters to use to define the acceleration and pitch rates during takeoff.
Public propertyFinalHeightAboveRunway
Gets or sets the final height above the runway at which to level off, in meters. The runway height is specified by the height of the RunwayStartPosition above the RunwayReferenceSurface (at the takeoff position).
Public propertyInitialHeightAboveRunway
Gets or sets the initial height offset above the runway, in meters. The runway height is specified by the height of the RunwayStartPosition above the RunwayReferenceSurface (at the initial position).
Public propertyInitialSpeed
Gets or sets the speed at which the platform is moving at the start of the runway, in meters per second.
Public propertyIsFrozen
Gets a value indicating whether this object is frozen. A frozen object cannot be modified and an ObjectFrozenException will be thrown if an attempt is made to do so.
(Inherited from DefinitionalObject.)
Public propertyRollDistance
Gets or sets the distance required to go from the initial speed to the takeoff speed, in meters.
Public propertyRunwayHeading
Gets or sets the heading of the runway with respect to north, in radians.
Public propertyRunwayReferenceSurface
Gets or sets the terrain reference surface for the runway. The runway is positioned at a constant offset from the terrain according to the height of the RunwayStartPosition, and the height of the platform is positioned above that runway height by an offset defined by InitialHeightAboveRunway.
Public propertyRunwayStartPosition
Gets or sets the position of the start of the runway. The Height of the position represents an additional offset for the runway above the terrain surface, in meters.
Public propertyTakeoffSpeed
Gets or sets the speed after the specified RollDistance at which the platform begins to takeoff, in meters per second.
Public propertyTurningRadiusAfterTakeoff
Gets or sets the horizontal turning radius at which to turn when approaching the glide plane for landing, in meters.
Public propertyTurningRadiusBeforeTakeoff
Gets or sets the final turning radius at which to turn toward the next procedure after landing, in meters. By default, this is one meter.
Top
Methods
  NameDescription
Protected methodCheckForSameDefinition(DefinitionalObject)
Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).
(Inherited from RouteSegment.)
Protected methodCheckForSameDefinition(RouteProcedure)
Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).
(Overrides RouteProcedureCheckForSameDefinition(RouteProcedure).)
Protected methodCheckForSameDefinition(RouteSegment)
Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).
(Inherited from RouteProcedure.)
Protected methodCheckForSameDefinition(TakeoffProcedure)
Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).
Public methodClone
Clones this object using the specified context.
(Overrides DefinitionalObjectClone(CopyContext).)
Protected methodComputeCurrentDefinitionHashCode
Computes a hash code based on the current properties of this object. Derived classes MUST override this method and compute a hash code that combines: a unique hash code seed, the base implementation result, and the hash codes of all new fields introduced by the derived class which are used in the CheckForSameDefinition(DefinitionalObject) method.
(Overrides RouteProcedureComputeCurrentDefinitionHashCode.)
Public methodCreateConfigurableProfile
Create a profile based on the given settings that the RoutePropagator can use to configure this profile in relation to all other profiles along the route.
(Overrides RouteSegmentCreateConfigurableProfile(SurfaceSegment).)
Public methodEnumerateDependencies
Enumerates the dependencies of this object by calling EnumerateT(T) for each object that this object directly depends upon. Derived classes which contain additional dependencies MUST override this method, call the base implementation, and enumerate dependencies introduced by the derived class.
(Inherited from DefinitionalObject.)
Public methodEquals
Determines whether the specified object is equal to the current object.
(Inherited from Object.)
Protected methodFinalize
Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object.)
Public methodFreeze
Freezes this object. Further attempts to modify it will result in an ObjectFrozenException.
(Inherited from DefinitionalObject.)
Protected methodFreezeAggregatedObjects
Called by Freeze to also freeze any objects that are considered to be a part of this object. Derived classes which contain additional aggregated objects MUST override this method, call the base implementation, and freeze aggregated objects introduced by the derived class. The objects that need to be frozen in this method are frequently created in this object's constructor and are not settable via properties.
(Inherited from DefinitionalObject.)
Public methodGetDefinitionHashCode
Gets a hash code representing the definition of this object.
(Inherited from DefinitionalObject.)
Public methodGetHashCode
Serves as the default hash function.
(Inherited from Object.)
Public methodGetSurfacePath
Get an object that will allow configuration of the surface geometry as it connects with other procedures.
(Overrides RouteProcedureGetSurfacePath.)
Public methodGetType
Gets the Type of the current instance.
(Inherited from Object.)
Public methodIsSameDefinition
Determines if this object has the same definition as another object.
(Inherited from DefinitionalObject.)
Protected methodMemberwiseClone
Creates a shallow copy of the current Object.
(Inherited from Object.)
Protected methodThrowIfFrozen
Throws ObjectFrozenException if this object IsFrozen. This method should be called from any method or property that modifies this object.
(Inherited from DefinitionalObject.)
Public methodToString
Returns a string that represents the current object.
(Inherited from Object.)
Top
See Also