Display contour levels in a 3D window for Comm and Radar objects.
VO <ObjectPath> Contours {On | Off}
Use the VO Contours command to turn on and off the display of contour levels in the 3D window.
The Gain contour levels can be shown for antenna, radar, receiver, and transmitter objects, and EIRP, FluxDensity, and RIP contour levels can be shown for radar and transmitter objects.
To actually set the contours that display in the 3D window, use the Graphics Contours (Comm & Radar) command.
Note: This command is not valid for a transmitter or receiver that is linked to an antenna object.
To turn off the display of contours for the rdr2 Radar:
VO */Satellite/EST56/Radar/rdr2 Contours Off
To display contours for Receiver1 attached to Facility1 in the 3D window:
VO */Facility/Facility1/Receiver/Receiver1 Contours On
To display contours for Antenna1:
VO */Ship/TestShip1/Antenna/Antenna1 Contours On
If activated, Connect returns an acknowledgement message.
This command belongs to the following group(s):
5.0.4
STK Programming Interface 11.0.1