SinglePropagateSegmentResults Class |
A PropagateSegment can optionally propagate multiple segments with an auto-sequence
with stopping conditions. When auto-sequences are run (possibly multiple times), there will
be a pattern where the PropagateSegments propagator propagates,
then the SegmentPropagator for the stopping conditions auto sequence will run, then the
original propagator if the stopping condition is configured to be tripped multiple times. The overall
SegmentResults returned will be the PropagateSegmentResults which is a
SegmentList. This is the results for those single run of the PropagateSegment
that gets run initially and after an auto-sequence finishes.
Inheritance HierarchySystemObject
AGI.Foundation.SegmentPropagationSegmentResults
AGI.Foundation.SegmentPropagationSinglePropagateSegmentResults
AGI.Foundation.SegmentPropagationSegmentResults
AGI.Foundation.SegmentPropagationSinglePropagateSegmentResults
Namespace: AGI.Foundation.SegmentPropagation
Assembly: AGI.Foundation.SegmentPropagation (in AGI.Foundation.SegmentPropagation.dll) Version: 24.3.420.0 (24.3.420.0)
SyntaxThe SinglePropagateSegmentResults type exposes the following members.
Constructors| Name | Description | |
|---|---|---|
 | SinglePropagateSegmentResults(SinglePropagateSegmentResults, CopyContext) | Initializes a new instance as a copy of an existing instance. |
 | SinglePropagateSegmentResults(SegmentPropagator, ITimeBasedState, PropagateSegmentConfiguration, StoppablePropagatorResults, Boolean, IListStateElementAdapter) |
Initializes a new instance.
|
Properties| Name | Description | |
|---|---|---|
 | Adapters |
Gets the list of adapters needed to transform the states of
this results to the next.
(Inherited from SegmentResults.) |
| AdditionalSegmentResults |
Gets a list of SegmentResults that this segment may have
propagated. For a SegmentList this will be the child segments
it propagated. For segments that ran optional segments, they will be included
here. This list will not have this instance of the results in it.
(Inherited from SegmentResults.) |
| BackwardsAdapters |
Gets the IListT of backwards adapters
associated with the ConditionStoppedOn that edited propagation. This will be
if there is no auto sequence getting run for the tripped stopping condition.
|
| Canceled |
Gets or sets a value indicating whether the propagation run was canceled.
(Inherited from SegmentResults.) |
| ConditionStoppedOn |
Gets or sets the final StoppingCondition that stopped propagation.
|
| Configuration |
Gets or sets the segment configuration that was used to
propagate the segment that made these results.
(Inherited from SegmentResults.) |
| EntireComputedEphemeris | Gets the entire ephemeris computed by the SegmentPropagator. This may include ephemeris points that should be ignored when looking at the objects overall trajectory. Examples of why this may not match the EphemerisForOverallTrajectory may be because a later segment had to start at some point before the end of this segment, or because the segment computed additional ephemeris to aid with interpolation. In order to work with the rest of the library, the elements in this list should be in time ascending order even if the segment was propagated backwards. Even for segments that do not actually propagate elements, the StateForNextSegment should be added to this list. |
| EphemerisForOverallTrajectory |
Gets the ephemeris that should be used to represent the objects trajectory. This list of ephemeris
points should be entirely contained in the EntireComputedEphemeris.
(Inherited from SegmentResults.) |
| FinalPropagatedState |
Gets the final state that was propagated by the SegmentPropagator in time
from the overall trajectory.
(Inherited from SegmentResults.) |
| FirstPropagatedState |
Gets the first state that was propagated by this segment. Often this will be
at the same time as the InitialState, but adapted into this segments
defined-in objects, but some segments define what their time and state is.
(Inherited from SegmentResults.) |
| Identifiers |
Gets the identifiers of all of the elements propagated by the segment.
(Inherited from SegmentResults.) |
| InitialState |
Gets or sets the initial state that the
SegmentPropagator was propagated from. If any processing was done to
the initial state passed into the
PropagateSegment(SegmentListResults, SegmentConfiguration, ITrackCalculationProgress) method (such as applying
adapters or initializing a different
state with the passed in initial
state) that modified state
should be set here instead of the passed in state.
(Inherited from SegmentResults.) |
| IsThreadSafe |
Gets a value indicating whether the methods on this instance are safe to call from
multiple threads simultaneously.
(Inherited from SegmentResults.) |
| OverrideSegmentListEphemeris |
Gets or sets a value indicating whether the SegmentPropagator that created these results requires
the parent SegmentListResults to update its EphemerisForOverallTrajectory.
This must be if this segment needed to start at some point other than
at the end of the previous SegmentPropagator. Otherwise leave this as .
(Inherited from SegmentResults.) |
| ParentResults |
Gets or sets the results of the SegmentListResults that contains the SegmentPropagator
that created these results. This gets set automatically by the SegmentListPropagator that
propagated the SegmentPropagator that made these results. It will be
if the SegmentPropagator that created this was not propagated in a SegmentListPropagator.
(Inherited from SegmentResults.) |
| PropagationDirection |
Gets what direction propagation initially occurred. For a SegmentList, this should
be the direction of the first SegmentPropagator it is propagating.
(Inherited from SegmentResults.) |
| Propagator |
Gets the SegmentPropagator that was used to make this set of results.
(Inherited from SegmentResults.) |
| SegmentCompletelyOverriddenByOverlappingSegment |
Gets or sets a value indicating whether a SegmentPropagator after the one that made these results stepped back so
far that the EphemerisForOverallTrajectory is empty. So if you have four
propagators, and the fourth propagator needs to back up all
the way to the first propagator, this property should be set to
for the second and third set of results.
(Inherited from SegmentResults.) |
| SegmentIdentifier | (Inherited from SegmentResults.) |
| SegmentOverrideStartsIn |
Gets or sets the segment that the
SegmentPropagator that created this set of results starts
in if this segment needs to start before the end of the previous segment.
This is only needed if another segment overlaps with this one.
(Inherited from SegmentResults.) |
| StateForNextSegment |
Gets a copy of the state to be passed to the next SegmentPropagator.
This is determined automatically by the StateForNextSegmentBehavior and the
EphemerisForOverallTrajectory.
(Inherited from SegmentResults.) |
| StateForNextSegmentBehavior |
Gets which state the SegmentPropagator will pass
to the next segment.
(Inherited from SegmentResults.) |
| StopAllPropagation |
Gets or sets a value indicating whether all propagation must stop and whatever results
have been computed should be returned.
(Inherited from SegmentResults.) |
| StoppablePropagatorResults |
Gets the results of the wrapped StoppablePropagator.
|
| StoppedOnMaximumDuration |
Gets a value indicating whether the propagation stopped due to the
MaximumDuration being exceeded.
|
| StopPropagationForCurrentSegmentList |
Gets or sets a value indicating whether the current SegmentListPropagator was told to
stop propagating its SegmentPropagators
but that propagation of anything after this propagator should continue.
(Inherited from SegmentResults.) |
| TimeIntervalOfEntireComputedEphemeris |
Gets the TimeInterval of the EntireComputedEphemeris.
(Inherited from SegmentResults.) |
| TimeIntervalOfEphemerisForOverallTrajectory |
Gets the TimeInterval of the EphemerisForOverallTrajectory.
(Inherited from SegmentResults.) |
| ValueOfStoppingCondition |
Gets the value of the final StoppingCondition that stopped propagation.
|
Methods| Name | Description | |
|---|---|---|
| AddEphemerisPoint |
Adds the state to the EntireComputedEphemeris and
EphemerisForOverallTrajectory and checks that all of the elements in the
state are included in the Identifiers. This will add
the state such that all of the states are in time ascending order.
(Inherited from SegmentResults.) |
| Clone |
Clones this object using the specified context.
(Overrides SegmentResultsClone(CopyContext).) |
| CropEphemerisForOverallTrajectory |
This method will clear the EphemerisForOverallTrajectory and fill it in with
the ephemeris from the EntireComputedEphemeris that is in the interval.
SegmentPropagators that propagate multiple segments may
need to override this to properly crop its child segments (and it is likely that some segments will have
an empty EphemerisForOverallTrajectory). This should not need to perform any
adaptation of the states involved; simply adjust the states in the EphemerisForOverallTrajectory.
For SegmentResults that are made up of multiple segments, this must be called on each individual
segment before being called on the overall results.
(Inherited from SegmentResults.) |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object.) |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object.) |
| GetAdapter |
Gets the adapter for the specified element.
(Inherited from SegmentResults.) |
| GetDateMotionCollectionOfOverallTrajectory(String, ReferenceFrame) |
Gets a DateMotionCollectionT of the element in the specified
ReferenceFrame from the EphemerisForOverallTrajectory.
This method assumes that you are asking for an entry that is of type Cartesian
and that the element in the state is of that type. The state type stored must be
ITimeBasedState.
(Inherited from SegmentResults.) |
| GetDateMotionCollectionOfOverallTrajectoryT(String) |
Gets a DateMotionCollectionT of the element from the
EphemerisForOverallTrajectory. The state type stored must be
ITimeBasedState. Use the GetMotionCollectionT(String) method if the
states stored are not time based.
Note that this method will not make any attempt to transform the returned DateMotionCollectionT into
its defined-in ReferenceFrame or Axes.
(Inherited from SegmentResults.) |
| GetElementDefinedIn |
Gets the Object that the element was defined in. Generally this is an Axes or
ReferenceFrame. If this returns then either the element
has no defined-in object, or the element was not propagated by the segment that made the results.
(Inherited from SegmentResults.) |
| GetHashCode | Serves as the default hash function. (Inherited from Object.) |
| GetMotionCollectionT(String) |
Returns a collection of MotionT of the element
from the EphemerisForOverallTrajectory. This will not make any attempt to transform the
returned ephemeris into a consistent ReferenceFrame or Axes.
(Inherited from SegmentResults.) |
| GetResultsOfSegment |
This method will do a recursive search through the SegmentResults and return the
first results that correspond with the segment, or
if the requested segment's results are not found.
(Inherited from SegmentResults.) |
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| IndexOfStateWithDateFromEntireComputedEphemeris |
Gets the indexes of states within EntireComputedEphemeris at the specified date.
(Inherited from SegmentResults.) |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object.) |
| SetElementDefinedIn |
Sets the defined-in object (ReferenceFrame, Axes...),
for the specified element.
(Inherited from SegmentResults.) |
| ToString | Returns a string that represents the current object. (Inherited from Object.) |
See Also