Following are listings of Connect commands added or changed in
the designated STK release version:
| Command |
Format |
Description |
Version |
| AllInstanceNames
|
AllInstanceNames <ApplicationPath> [IncludeAccess]
[<Delimiter>] |
Add the IncludeAccess and <Delimiter> keywords. |
11 |
| CalculationTool Scalar
Calculation
|
CalculationTool <ScenarioPath> <ParentObject>
{Action} {"Scalar Calculation" | "Scalar CalculationTemplate"}
<ComponentName> [{ScalarCalculationType}
<TypeParams>] |
Add "Average", "Spatial Calculation at Point", and "Standard
Deviation" Scalar Calculations; add option to override the start
time of a File type Scalar Calculations |
11 |
| CalculationTool_R
|
CalculationTool_R <ScenarioPath> {Option}
[<Parameters>] |
Add ValueOnly and RateOnly options; add ScalarMinMax and
ScalarSTDMean options. |
11 |
| Comm CommSystem
AccessOptions
|
Comm <CommSysObjectPath> CommSystem AccessOptions
<Parameters> |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem Clear
|
Comm <CommSysObjectPath> CommSystem Clear |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem
Compute
|
Comm <CommSysObjectPath> CommSystem Compute [NOW] |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem
IFSources
|
Comm <CommSysObjectPath> CommSystem IFSources {Action}
<TruncObjectPath> |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem
Interference
|
Comm <CommSysObjectPath> CommSystem Interference {Yes |
No} [{PFDRefBandwidth}] |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem
Interval
|
Comm <CommSysObjectPath> CommSystem Interval
{UseScenarioTime} <StepSize> [{TimeInterval}] |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem
LinkDefinition
|
Comm <CommSysObjectPath> CommSystem LinkDefinition
{Receive | Transmit} {LinkCriteria} |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem
Receive
|
Comm <CommSysObjectPath> CommSystem Receive {Action}
<TruncObjectPath> |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem
SaveMode
|
Comm <CommSysObjectPath> CommSystem SaveMode
{Option} |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem
Transmit
|
Comm <CommSysObjectPath> CommSystem Transmit {Action}
<TruncObjectPath> |
Replaced this command with CommSystem command. |
11 |
| CommSystem
|
CommSystem <CommSystemPath> {Options}
[<Parameters>] |
New command. |
11 |
| CommSystem_RM
|
CommSystem_RM <CommSystemPath> GetValue
[<AttributePath>] |
New command. |
11 |
| GIS Import
|
GIS <ScenarioPath> Import "<ShapefilePath>"
{ObjectType} [<ImportOptions>] |
Add ImportTo option. |
11 |
| GenFluxHistory
|
GenFluxHistory <ScenarioPath> ({FluxOption}
<Value>)... |
The CSSI predicts file replaces older obsolete solar flux
predicts files. |
11 |
| Graphics FOMContours
|
Graphics <ObjectPath> FOMContours {GfxType}
{ContourOption} [<Parameters>] |
Add LineWidth, LineStyle, Marker, ShowMarkerHighlight, and
ShowGfxOnTrack options. |
11 |
| MissionModeler
Procedure
|
MissionModeler <AircraftObjectPath> Procedure
{ProcedureOption} <Parameters> |
Add documentation of time options. |
11 |
| ObjectBrowser
|
ObjectBrowser <ApplicationPath> {Options} |
Newly documented command. |
11 |
| Point AlongVector
|
Point <SensorObjectPath> AlongVector
"<AlignmentVector>" "<ConstraintVector>"
[<ClockAngleOffset>] |
New command. |
11 |
| SDF
|
SDF <ApplicationPath> {Option} [<Parameters>] |
Parameter updates to handle multiple servers. |
11 |
| SDFLoad
|
SDFLoad <ApplicationPath> <Parameters> |
Parameter updates to handle multiple servers. |
11 |
| SDFSave
|
SDFSave <ApplicationPath> <ObjectPath>
"<ServerFilePath>" [<Options>] |
Parameter updates to handle multiple servers. |
11 |
| SDF_RM
|
SDF_RM <ApplicationPath> {Option} |
Parameter updates to handle multiple servers. |
11 |
| SetAttitude File
|
SetAttitude <VehObjectPath> File "<FilePath>"
[<Blocking>] [{SaveFile | SaveLocally}] |
Add option to override the start time of a File. |
11 |
| SetAttitude Profile
|
SetAttitude <ObjectPath> Profile {ProfileType}
<Parameters> |
Add IIF, IIR, IIFNominal, QZSS and GalileoIOV to GPS Model
Type. Change IIAGYM95 Model Type to IIA. |
11 |
| SetState FromFile
|
SetState <VehObjectPath> FromFile "<FilePath>"
[{Options}] |
Add LimitEphemeris option. |
11 |
| SpatialTool
|
SpatialTool <ScenarioPath> {Options} |
New command. |
11 |
| SpatialTool
Spatial Calculation
|
SpatialTool <ScenarioPath> <ParentObject> {Action}
{Spatial Calculation | Spatial CalculationTemplate} <Spatial
CalculationName> [{Spatial CalculationType} <Spatial
CalculationTypeParams>] |
New command. |
11 |
| SpatialTool
Spatial Condition
|
SpatialTool <ScenarioPath> <ParentObject> {Action}
{Spatial Condition | Spatial ConditionTemplate} <Spatial
ConditionName> [{Spatial ConditionType} <Spatial
ConditionTypeParams>] |
New command. |
11 |
| SpatialTool Volume
Grid
|
SpatialTool <ScenarioPath> <ParentObject> {Action}
{Volume Grid | Volume GridTemplate} <Volume GridName>
[{Volume GridType} <Volume GridTypeParams>] |
New command. |
11 |
| SpatialTool_R
|
SpatialTool_R <ScenarioPath> {Option}
[<Parameters>] |
New command. |
11 |
| SpatialTool_RM
|
SpatialTool_RM <ScenarioPath> {Option}
[<Parameters>] |
New command. |
11 |
| Terrain
|
Terrain <ScenarioPath> {Action} <Parameters> |
Add TerrainServer commands. |
11 |
| TerrainServer
|
TerrainServer <ApplicationPath> <Parameters> |
New command. |
11 |
| TerrainServer_RM
|
TerrainServer_RM <ApplicationPath> {Option} |
New command. |
11 |
| Terrain_RM
|
Terrain_RM <ScenarioPath> TerrainServer {Option} |
New command. |
11 |
| Units_Set
|
Units_Set <ScenarioPath> {Option} <Parameters> |
Updated JulDateOffset and MissionElapsed Date units to require
additional data. |
11 |
| VO ModelPointing
|
VO <ObjectPath> ModelPointing "<AttachPoint>"
{ModelPointOption} <Value> |
Add FromFile option to the Load {IntervalOption}. |
11 |
| VO OrbitSystem
|
VO <VehObjectPath> OrbitSystem {Action} {Options} |
Add PersistForAllPasses option. |
11 |
| VO SetVectorGeometry
|
VO <ObjectPath> SetVectorGeometry {Option}
<Parameters> [WindowID <WinNumber>] |
Add AddColorInterval and DeleteColorInterval to Axes and Vector
display options. |
11 |
| VO TerrainAndImagery
|
VO <ScenarioPath> TerrainAndImagery {Options}
<Parameters> |
Modify Visual Terrain options. |
11 |
| VO View
|
VO <ScenarioPath> View {Options} |
Add PanOnCentralBodies option to Rotate. |
11 |
| VO Volumes
|
VO <ObjectPath> Volumes {VolumeOption}
[<Parameter>] |
Add AddColorLevel and DeleteColorLevel options. |
11 |
| VO VolumetricGfx
|
VO <VolumetricPath> VolumetricGfx {{GfxOptions} | {Legend
Options}} |
New command. |
11 |
| VO_R
VisualTerrainCurrentServer
|
VO_R <ScenarioPath> VisualTerrainCurrentServer |
Replaced this command with TerrainServer_RM command. |
11 |
| VO_RM
VisualTerrainServers
|
VO_RM <ScenarioPath> VisualTerrainServers |
Replaced this command with TerrainServer_RM command. |
11 |
| VO_RM
VisualTerrainTilesets
|
VO_RM <ScenarioPath> VisualTerrainTilesets [Server
<ServerName>] |
Replaced this command with TerrainServer_RM command. |
11 |
| VectorTool Axes
|
VectorTool <ScenarioPath> <ParentObject> {Action}
{Axes | AxesTemplate} <AxesName> [{AxesType}
<AxesTypeParams>] |
Add option to override the start time of a File type Axes. |
11 |
| VectorTool Point
|
VectorTool <ScenarioPath> <ParentObject> {Action}
{Point | PointTemplate} <PointName> [{PointType}
<PointTypeParams>] |
Add option to override the start time of a File type
Point. |
11 |
| VectorTool Vector
|
VectorTool <ScenarioPath> <ParentObject> {Action}
{Vector | VectorTemplate} <VectorName> [{VectorType}
<VectorTypeParams>] |
Add "Displacement on Surface" Vector; update "Cross Product"
Vector; add option to override the start time of a File type
Vector. |
11 |
| Volumetric
|
Volumetric <VolumetricPath> {Define | Compute | Clear |
Reload | Export] [<Parameters>] |
New command. |
11 |
| Window3D
|
Window3D <ScenarioPath> {Window3dOptions} |
Add GreasePencil options to InpDevMode. Add Droplines option to
EditData. |
11 |
| Command |
Format |
Description |
Version |
| Animate
|
Animate <ScenarioPath> {AnimateOption}
<Parameters> |
Add the Refresh option. |
10.1 |
| AttitudeSegment
|
AttitudeSegment <ObjectPath> {Add | Delete | Modify}
{SegmentType} <Parameters> |
Add StartTime option to Modify command. |
10.1 |
| CalculationTool
Condition Set
|
CalculationTool <ScenarioPath> <ParentObject>
{Action} {"Condition Set" | "Condition SetTemplate"}
<ComponentName> [{ConditionType} <TypeParams>] |
Add the Calculation Condition Set component type. |
10.1 |
| CalculationTool_RM
|
CalculationTool_RM <ScenarioPath> {Option}
[<Parameters>] |
Add Names option. |
10.1 |
| ClutterDB
|
ClutterDB <ScenarioPath> "<FilePath>" |
Replaced this command with RadarClutter command. |
10.1 |
| Convert
OrbitPointMotion
|
Convert <ScenarioPath> OrbitPointMotion [Precision
<Value>] {FromElementsType} <Elements>
{ToElementsType} |
Add Precision option. |
10.1 |
| ConvertDate
|
ConvertDate <ScenarioPath> {InputFormat} {OutputFormat}
"<DateTime>" |
This command has been replaced with the Units_Convert
command. |
10.1 |
| ConvertUnit
|
ConvertUnit <ScenarioPath> {Dimension} {InputUnitID}
{OuputUnitID} <InputValue> |
This command has been replaced with the Units_Convert
command. |
10.1 |
| DefaultTrack2d
|
DefaultTrack2d <MTOObjectPath> {TrackOptions} |
Add LineTranslucency option. |
10.1 |
| DefaultTrack3d
|
DefaultTrack3d <MTOObjectPath> {TrackOptions} |
Add Articulation options. |
10.1 |
| DisplayTimes
|
DisplayTimes <ObjectPath> {DisplayOption} {Action}
[<Parameters>] |
Add TimeComponent option. |
10.1 |
| GISOverlay
|
GISOverlay <ScenarioPath> "STK Overlay" {Add | Delete}
"<OverlayFilepath>" |
Remove obsolete options from the command. |
10.1 |
| GraphCreate
|
GraphCreate <ObjectPath> ({Option} <Value>)... |
Add Title and SubTitle options. |
10.1 |
| Graphics (Radar) |
Graphics <RdrObjectPath> {GfxType} {GfxOption} [{State}]
[<Parameters>] |
Added the Clutter option. |
10.1 |
| Graphics
ExportBlockContours
|
Graphics <FOMObjectPath> ExportBlockContours {Option}
<Parameters> [{Option} <Parameters>...] |
New command. |
10.1 |
| Graphics
ExportSmoothContours
|
Graphics <FOMObjectPath> ExportSmoothContours {Option}
<Parameters> [{Option} <Parameters>...] |
New command. |
10.1 |
| Graphics
SetDynamicState
|
Graphics <ObjectPath> SetDynamicState IsDynamic {On |
Off} |
Add Sensor object. |
10.1 |
| Graphics
TimeComponents (Vehicles) |
Graphics <ObjectPath> TimeComponents {Action}
[<Parameters>] |
Add Priority option, and IntervalList option. |
10.1 |
| Graphics_R
TimeComponents
|
Graphics_R <ObjectPath> TimeComponents {Option} |
New command. |
10.1 |
| MapAnnotation_RM
|
MapAnnotation_RM <ScenarioPath> {Option} [WindowID
<WinNumber>] |
New command. |
10.1 |
| MapSnap
|
MapSnap <ScenarioPath> {SnapOption} [<Parameters>]
[<WinNumber>] |
Allow different formats to be saved. |
10.1 |
| RCS
|
RCS <ObjectPath> {Options} <Parameters> |
Updated to use attributes. |
10.1 |
| RCS (Deprecated) |
RCS <ObjectPath> {RCSOption} <Parameters> |
Replaced this command with new RCS command. |
10.1 |
| RCS_RM
|
RCS_RM <ObjectPath> GetValue [<AttributePath>] |
New command. |
10.1 |
| Radar
|
Radar <RdrObjectPath> {Options} <AttributePath>
[<Value>] [<Unit>] |
New command. |
10.1 |
| Radar Antenna
|
Radar <RdrObjectPath> Antenna {AntennaType}
<Parameters> |
Replaced this command with Radar command. |
10.1 |
| Radar Define
|
Radar <RdrObjectPath> Define {Monostatic | BiStatic}
<Parameters> |
Replaced this command with Radar command. |
10.1 |
| Radar GainLoss
|
Radar <RdrObjectPath> GainLoss {ClearAll | <Label1>
<Value1>} [<Label2> <Value2>...] |
Replaced this command with Radar command. |
10.1 |
| Radar Jammers
|
Radar <RdrObjectPath> Jammers {Add | Remove} {All |
<JammerPath>} |
Replaced this command with Radar command. |
10.1 |
| Radar Orient
|
Radar <RdrObjectPath> Orient {Orientation}
<Parameters> |
Replaced this command with Radar command. |
10.1 |
| Radar Polarization
|
Radar <RdrObjectPath> {PolarizationOption}
{Parameters} |
Replaced this command with Radar command. |
10.1 |
| Radar RainModel
|
Radar <RdrObjectPath> RainModel {State}
[<Outage>] |
Replaced this command with Radar command. |
10.1 |
| Radar SAR
|
Radar <RdrObjectPath> SAR {SARProps} [<Value>] |
Replaced this command with Radar command. |
10.1 |
| Radar SearchTrack
|
Radar <RdrObjectPath> SearchTrack {Mode}
[{SearchTrackProps} <Value>] |
Replaced this command with Radar command. |
10.1 |
| Radar SysTemp
|
Radar <RdrObjectPath> SysTemp {SystemOptions}
<Parameters> |
Replaced this command with Radar command. |
10.1 |
| RadarClutter
|
RadarClutter <ObjectPath> SetValue <AttributePath>
<Value> [<Unit>] |
New command. |
10.1 |
| RadarClutter_RM
|
RadarClutter_RM <ObjectPath> GetValue
[<AttributePath>] |
New command. |
10.1 |
| Radar_RM
|
Radar_RM <ObjectPath> GetValue
[<AttributePath>] |
New command. |
10.1 |
| RdrAdvModel
|
RdrAdvModel <RdrObjectPath> {ModelOption}
[<Parameters>] |
Replaced this command with Radar command. |
10.1 |
| SetConnectReportUnits
|
SetConnectReportUnits <ScenarioPath> {Dimension}
<Unit> ["<Offset>"] [{Dimension2} {Unit2}...] |
This command has been replaced with the Units_Set command. |
10.1 |
| SetConnectReportUnitsFlag
|
SetConnectReportUnitsFlag <ScenarioPath> {On | Off} |
This command has been replaced with the Units_Set command. |
10.1 |
| SetConstraint
(Comm) |
SetConstraint <ObjectPath> {ConstraintName}
<Parameters> |
Add ProcessDelay temporal constraint. |
10.1 |
| SetConstraint
(Radar) |
SetConstraint <RdrObjectPath> {ConstraintName}
<Parameters> |
Updated value ranges and availability for some
constraints. |
10.1 |
| SetConstraint
(Vehicles) |
SetConstraint <ObjectPath> {ConstraintName}
<Parameters> |
Add SetIntervalsOverwrite option. |
10.1 |
| SetGUIUnits
|
SetGUIUnits <ScenarioPath> {Dimension} {UnitID}
[{Dimension2} {UnitID2}...] |
This command has been replaced with the Units_Set command. |
10.1 |
| SetInternalUnits
|
SetInternalUnits <ScenarioPath> {UnitOption} |
This command has been replaced with the Units_Set command. |
10.1 |
| SetReportUnits
|
SetReportUnits <ScenarioPath> {Dimension} <Unit>
["<Offset>"] [{Dimension2} {Unit2}...] |
This command has been replaced with the Units_Set command. |
10.1 |
| SetState 11Parameter
|
SetState <SatObjectPath> 11Parameter <Options> |
Add NoProp option. |
10.1 |
| SetState Cartesian
|
SetState <VehObjectPath> Cartesian {Propagator} {NoProp |
{TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>"
<X> <Y> <Z> <vX> <vY> <vZ>
["<CoordEpoch>"] |
Add NoProp option. |
10.1 |
| SetState Classical
|
SetState <VehObjectPath> Classical {Propagator} {NoProp |
{TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>"
<SemiMajorAxis> <Eccentricity> <Inclination>
<ArgOfPerigee> <RAAN> <MeanAnom>
["<CoordEpoch>"] |
Add NoProp option. |
10.1 |
| SetState Equi
|
SetState <VehObjectPath> Equi {Propagator} {NoProp |
{TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>"
<SemimajorAxis> <h> <k> <p> <q>
<MeanLon> {Retrograde | Posigrade}
["<CoordEpoch>"] |
Add NoProp option. |
10.1 |
| SetState File
|
SetState <VehObjectPath> File "<FilePath>"
[{Options}] |
Replace with SetState FromFile command. |
10.1 |
| SetState GPS
|
SetState <SatObjectPath> GPS <PRN>
[{SetStateOption} <Value> ...] |
Add NoProp option. |
10.1 |
| SetState
MixedSpherical
|
SetState <VehObjectPath> MixedSpherical {Propagator}
{NoProp | {TimeInterval}} <StepSize> {CoordSystem}
"<OrbitEpoch>" <Longitude> <GeodeticLatitude>
<Altitude> <HorizontalFlightPathAngle>
<FlightPathAzimuth> <Velocity>
["<CoordEpoch>"] |
Add NoProp option. |
10.1 |
| SetState SGP4
(Satellites) |
SetState <SatObjectPath> SGP4 {NoProp | {TimeInterval}}
<StepSize> <SSCNumber> TLESource {Automatic |
DefineElements} [<Parameters>] |
Add DefineElements Source DefaultFile option. Add NoProp
option. |
10.1 |
| SetState SP3
|
SetState <SatObjectPath> SP3 <Options> |
Add NoProp option. |
10.1 |
| SetState SPICE
|
SetState <SatObjectPath> SPICE <Options> |
New command. |
10.1 |
| SetState
SimpleAscent (Launch Vehicle) |
SetState <LVObjectPath> SimpleAscent {StartTime}
[{StopTime}] <StepSize> {Geodetic | Geocentric}
<LaunchLat> <LaunchLon> {<LaunchAlt> |
<LaunchRadius>} <BurnoutVelocity> <BurnoutLat>
<BurnoutLon> {<BurnoutAlt> | <BurnoutRadius>}
[NoProp] |
Add NoProp option. |
10.1 |
| SetState Spherical
|
SetState <VehObjectPath> Spherical {Propagator} {NoProp |
{TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>"
<RightAscension> <Declination> <Radius>
<HorizontalFlightPathAngle> <FlightPathAzimuth>
<Velocity> ["<CoordEpoch>"] |
Add NoProp option. |
10.1 |
| SetState TLE
(Satellites) |
SetState <SatObjectPath> TLE "<TLECard1>"
"<TLECard2>" [{Options}] |
Add NoProp option. |
10.1 |
| SetUnits
|
SetUnits <ApplicationPath> {Unit1} [{Unit2}]
[{Unit3}] |
This command has been replaced with the Units_Set command. |
10.1 |
| ShowNames
|
ShowNames <ScenarioPath> [SubObjects
[<ParentPath>]] [Class <ClassName>] |
Update syntax to allow showing specific class of an
object. |
10.1 |
| ShowUnits
|
ShowUnits <ScenarioPath> {UnitLevel} |
This command has been replaced with the Units_Get command. |
10.1 |
| TimeTool
Collection of Interval Lists
|
TimeTool <ScenarioPath> <ParentObject> {Action}
{"Collection of Interval Lists" | "Collection of Interval
ListsTemplate"} <ComponentName>
[{CollectionOfIntervalListsType} <TypeParams>] |
Add "Satisfaction" time component type. |
10.1 |
| TimeTool Time Array
|
TimeTool <ScenarioPath> <ParentObject> {Action}
{"Time Array" | "Time ArrayTemplate"} <ComponentName>
[{TimeArrayType} <TypeParams>] |
Add Fixed Times Time Array type. |
10.1 |
| TimeTool_RM
|
TimeTool_RM <ScenarioPath> {Option}
[<Parameters>] |
Add Names option. |
10.1 |
| Timeline
|
Timeline <ScenarioPath> {Option} <Parameters> |
New command. |
10.1 |
| Track
|
Track <MTOObjectPath> {TrackOption} |
Add SetAttitudeAxes and UseAttitudeAxes options. |
10.1 |
| Track2d
|
Track2d <MTOObjectPath> {TrackOption} |
Add LineTranslucency option. |
10.1 |
| Track3d
|
Track3d <MTOObjectPath> {TrackOption} |
Add Articulation options. |
10.1 |
| Units_Convert
|
Units_Convert <ScenarioPath> {Date | Unit}
<Parameters> |
New command. |
10.1 |
| Units_Get
|
Units_Get <ScenarioPath> {Option} |
New command. |
10.1 |
| Units_SetConnect
|
Units_SetConnect <AppOrScenPath> {Default | Internal |
{Dimension} {Unit}... } |
New command. |
10.1 |
| VO Attributes
(Star) |
VO <StarPath> Attributes {AttributeOption}
<Parameters> |
New command. |
10.1 |
| VO BearingBox
|
VO <ObjectPath> BearingBox {Keyword} <Value>
[{Keyword} <Value>...] |
Add options to allow applicable values to be entered in Connect
distance units instead of only meters. |
10.1 |
| VO BearingEllipse
|
VO <ObjectPath> BearingEllipse {Keyword} <Value>
[{Keyword} <Value>...] |
Add options to allow applicable values to be entered in Connect
distance units instead of only meters. |
10.1 |
| VO DynDataText
|
VO <ObjectPath> DynDataText {DynDataTextOption}
<Parameters> [{DisplayOption} <Value>]
[<WinNumber>] |
Add title and background {DisplayOptions}. Deprecate the
Position option in favor of the new Pos option. |
10.1 |
| VO Globe
|
VO <ScenarioPath> Globe {GlobeOption} <Value> |
Add Water option. |
10.1 |
| VO LineOfBearing
|
VO <ObjectPath> LineOfBearing {Keyword} <Value>
[{Keyword} <Value>...] |
Add options to allow applicable values to be entered in Connect
distance units instead of only meters. |
10.1 |
| VO Obscuration
|
VO <SensorObjectPath> Obscuration {ObscurationOption}
<Parameters> |
Improve CentralBody option. |
10.1 |
| VO Overlay
|
VO <ScenarioPath> Overlay {Action} "<FilePath>"
[{OverlayOption} <Value>] |
Add FirstPixelTranspColor option |
10.1 |
| VO RefreshArticState
|
VO <ObjectPath> RefreshArticState |
New command. |
10.1 |
| VO_R MapID
|
VO_R <ScenarioPath> MapID [{Type} | Count [{Type}]] |
Add option to return MapIDs of a specified type. |
10.1 |
| VO_RM Annotation
|
VO_RM <ScenarioPath> Annotation {Option} [WindowID
<WinNumber>] |
New command. |
10.1 |
| VectorTool_R
|
VectorTool_R <ScenarioPath> {Option}
[<Parameters>] |
Add ConvertSystem and ConvertAxes options. |
10.1 |
| VectorTool_RM
|
VectorTool_RM <ScenarioPath> {Option}
[<Parameters>] |
Add Names option. |
10.1 |
| Command |
Format |
Description |
Version |
| ACAT
|
ACAT <AdvCatObjPath> {CalculateOptions}
<Parameters> |
Add SampleStepSize, RemoveSecondaryBySSC, AllowPartialEphem,
ForceReprop and ComputeOnLoad options. Update time options. |
10 |
| ACATProbability_R
|
ACATProbability_R <AdvCatObjPath> Primary <Name>
Secondary <Name> TCA "<DateTime>" Method {Method} |
Update time options. |
10 |
| ADF
|
ADF <ApplicationPath> {Option} [<Parameters>] |
Replaced this command with SDF. |
10 |
| ADFLoad
|
ADFLoad <ApplicationPath> <Parameters> |
Replaced this command with SDFLoad. |
10 |
| ADFSave
|
ADFSave <ApplicationPath> <ObjectPath>
"<ServerFilePath>" [<Options>] |
Replaced this command with SDFSave. |
10 |
| ADF_RM
|
ADF_RM <ApplicationPath> {Option} |
Replaced this command with SDF_RM. |
10 |
| AER
|
AER <FromObjectPath> <ToObjectPath>
[{AccessOptions}] |
Update time options. |
10 |
| Access
|
Access <FromObjectPath> <ToObjectPath>
[{AccessOptions}] |
Update time options. |
10 |
| AccessConfig
|
AccessConfig <ApplicationPath> {AccessConfigOption} |
Add PreferredTimeSense option. |
10 |
| AddAttitude AngVels
|
AddAttitude <ObjectPath> AngVels {StartTime}
<XAngVel> <YAngVel> <ZAngVel> |
Update time options. |
10 |
| AddAttitude CBFQuat
|
AddAttitude <ObjectPath> CBFQuat {StartTime} <Q1>
<Q2> <Q3> <Q4> |
Update time options. |
10 |
| AddAttitude DCM
|
AddAttitude <ObjectPath> DCM {StartTime} <Value1>
<Value2> <Value3> <Value4> <Value5>
<Value6> <Value7> <Value8> <Value9> |
Update time options. |
10 |
| AddAttitude ECIYPR
|
AddAttitude <ObjectPath> ECIYPR {StartTime} {Sequence}
<Yaw> <Pitch> <Roll> |
Update time options. |
10 |
| AddAttitude Euler
|
AddAttitude <ObjectPath> Euler {StartTime} {Sequence}
<Angle1> <Angle2> <Angle3> |
Update time options. |
10 |
| AddAttitude
EulerRates
|
AddAttitude <ObjectPath> EulerRates {StartTime}
{Sequence} <AngleRate1> <AngleRate2>
<AngleRate3> |
Update time options. |
10 |
| AddAttitude Profile
|
AddAttitude <ObjectPath> Profile [<ProfileName>]
{StartTime} {ProfileType} <Parameters> |
Update time options; add VariableTimeSlew profile. |
10 |
| AddAttitude Quat
|
AddAttitude <ObjectPath> Quat {StartTime} <Q1>
<Q2> <Q3> <Q4> |
Update time options. |
10 |
| AddAttitude YPR
|
AddAttitude <ObjectPath> YPR {StartTime} {Sequence}
<Yaw> <Pitch> <Roll> |
Update time options. |
10 |
| AddTgtSched
|
AddTgtSched <SensorObjectPath> {ScheduleOption}
[<Parameters>] |
Update time options. |
10 |
| AddWaypoint
|
AddWaypoint <VehObjectPath> {AddMethod}
<Parameters> [<TurnRadius>] |
Update time options. |
10 |
| AnalysisWorkbench
|
AnalysisWorkbench <ApplicationPath> {Options} |
New command. |
10 |
| AttCov FOMDefine
|
AttCov <AttFOMObjectPath> FOMDefine {Satisfaction |
Limits | Definition} {FOMOption} <Parameters> |
Add Limits option. |
10 |
| AttCov Interval
|
AttCov <AttCovObjectPath> Interval {TimeInterval} |
Update time options. |
10 |
| AttSim (Satellites) |
AttSim <SatObjectPath> {AttSimOption}
<Parameters> |
Update time options. |
10 |
| CAT
|
CAT <ObjectPath> {Option} |
Improve Launch Window analysis. |
10 |
| CalculationTool
Condition
|
CalculationTool <ScenarioPath> <ParentObject>
{Action} {"Condition" | "ConditionTemplate"} <ComponentName>
[{ConditionType} <TypeParams>] |
Add calculation component types. |
10 |
| CalculationTool
Parameter Set
|
CalculationTool <ScenarioPath> <ParentObject>
{Action} {"Parameter Set" | "Parameter SetTemplate"}
<ComponentName> [{ParameterSetType} <TypeParams>] |
Add calculation component types. |
10 |
| Chains
|
Chains <ObjectPath> {ChainOption}
[<Parameters>] |
Update time options. |
10 |
| ClearAccess
|
ClearAccess <FromObjectPath> <ToObjectPath> |
New command. |
10 |
| ClearAllAccess
|
ClearAllAccess <ApplicationPath> |
New command. |
10 |
| ComputeTerrainMaskAsNeeded
|
ComputeTerrainMaskAsNeeded <FacObjectPath> {On |
Off} |
New command. |
10 |
| Cov Access
(Single Object Coverage) |
Cov <ObjectPath> Access {ComputeOption}
[<Parameters>] |
Update time options. Add Place object to single-object
coverage. |
10 |
| Cov Asset
|
Cov <CovDefnObjectPath> Asset <AssetObjectPath>
{Action} |
Add Place object to single-object coverage. |
10 |
| Cov Grid
|
Cov <CovDefnObjectPath> Grid {GridOption}
<Parameters> |
Add CustomPointAltitudeMethod Grid option. Add Place as valid
grid point object. |
10 |
| Cov Interval
|
Cov <CovDefnObjectPath> Interval {TimeInterval} |
Update time options. |
10 |
| Cov_RM
Access (Single Object Coverage) |
Cov_RM <ObjectPath> Access Compute "<ReportStyle>"
[{TimeIntervals} | UseObjectTimes [TimeStep <Value>]] |
Update time options. Add Place object to single-object
coverage. |
10 |
| CreateTLEFile
|
CreateTLEFile <ScenarioPath> {Source}
"<TLEFilePath>" [{Options}] {SearchParameters} |
Update time options. |
10 |
| DeckAccess
|
DeckAccess <FromObjectPath> {{TimeInterval} |
UseObjInterval} {TargetDeckType} "<TargetDeck>" {SortObj |
SortTime} {OutReport | OutFile "<OutputFilePath>"}
[{OptionalParameters}] |
Add ConstraintObject, TLEEpochFilter, AddSatellites,
SetModelScale, AltitudeDefinition optional parameters. Update time
options. |
10 |
| ExternalData
|
ExternalData <ObjectPath> {DataOption}
[<Parameters>] |
Update time options. |
10 |
| FieldOfView_RM
|
FieldOfView_RM <MTOObjectPath> Object
<SensorObjPath> {FOVOptions} |
Update time options. |
10 |
| GenerateTLE
(Satellites) |
GenerateTLE <SatObjectPath> {Method} [{TimeInterval}
<TimeStep>] "<TLEEpoch>" <SSCNumber>
<MaxIterations> <Convergence> [{Routine}]
[<NameOfNewSatellite>] [IntlDes <IntlDesignator>]
[ElemNum <ElementNumber>] [BStar <BStarValue>]
[Classification <Class>] [RevNumber <Value>] |
Update time options. |
10 |
| GetSTKVersion
|
GetSTKVersion <ApplicationPath> [Details | Platform] |
Updated value returned by Details option. Add Platform
option. |
10 |
| Graphics
(Chains & Constellations) |
Graphics <ObjectPath> {ChainGfxOption}
[<Parameters>] |
Add Show option. |
10 |
| Graphics (Coverage) |
Graphics <CovDefnObjectPath> {GfxType}
{DisplayOption} |
Add FillTranslucency and Show option. |
10 |
| Graphics (Figure of
Merit) |
Graphics <FOMObjectPath> {GfxType}
<Parameters> |
Add FillTranslucency and Show option. |
10 |
| Graphics
(Single Object Coverage) |
Graphics <ObjectPath> {Static | Animation} {On | Off}
{GFXOptions} |
Add Place object to single-object coverage. |
10 |
| Graphics AzElMask
|
Graphics <ObjectPath> AzElMask Type {Altitude | Range}
[{AzElMaskOptions}] |
Add Place object. |
10 |
| Graphics
BackgroundImage
|
Graphics <ScenarioPath> BackgroundImage {Options} |
New command. |
10 |
| Graphics
BingMapsLogo
|
Graphics <ScenarioPath> BingMapsLogo {Options} |
New command. |
10 |
| Graphics
CustomIntervals (Vehicles) |
Graphics <ObjectPath> CustomIntervals {Action}
[<Parameters>] |
Add Import option. |
10 |
| Graphics
ElevContours
|
Graphics <ObjectPath> ElevContours {AddMethod}
[<Parameters>] |
Add FillTranslucency option. |
10 |
| Graphics
FillTranslucency
|
Graphics <ObjectPath> FillTranslucency <Value> |
New command. |
10 |
| Graphics
GlobalAttributes
|
Graphics <ScenarioPath> {AttributeOption} {On | Off} |
Add Place object. |
10 |
| Graphics Nightlights
|
Graphics <ScenarioPath> Nightlights {DisplayOptions} |
New command. |
10 |
| Graphics ObjectLine
|
Graphics <ScenarioPath> ObjectLine {Action} FromObj
<TruncObjectPath1> ToObj <TruncObjectPath2>
[{LineOptions}] |
Add ImportIntervals option. |
10 |
| Graphics Projection
|
Graphics <SensorObjectPath> Projection {Option} |
Add Place object. |
10 |
| Graphics
RangeContours
|
Graphics <ObjectPath> RangeContours {AddMethod}
[<Parameters>] |
Add FillTranslucency option. |
10 |
| Graphics
SetAccessGfx
|
Graphics <ObjectPath> SetAccessGfx {AccessObject}
{AccessGfxOptions} |
Add Place object; add Show option. |
10 |
| Graphics
SetAttrType (Vehicles) |
Graphics <ObjectPath> SetAttrType {AttributeType} |
Add TimeComponents attribute type. |
10 |
| Graphics SetColor
|
Graphics <ObjectPath> SetColor {Color} [{Item}] |
Add Place object. |
10 |
| Graphics Show
|
Graphics <ObjectPath> Show {On | Off} |
Command available for all objects. |
10 |
| Graphics TimeEvent
|
Graphics <SatObjectPath> TimeEvent {Action} [{EventType}]
<EventParameters> |
Update time options. Add Import option. |
10 |
| Graphics
WaypointAttributes
|
Graphics <VehObjectPath> WaypointAttributes
{WaypointOptions} ({GfxOption} <Parameter>)... |
Update time options. |
10 |
| Graphics WindowState
|
Graphics <ObjectPath> WindowState {Options} |
Newly documented command. |
10 |
| GroundEllipse
|
GroundEllipse <VehObjectPath> {EllipseSetOptions} |
Update time options. |
10 |
| HPOP Force
|
HPOP <ObjectPath> Force {ForceModel}
<ModelParameters> |
Add UseGravitySecularVariations option. |
10 |
| HPOP Integrator
|
HPOP <ObjectPath> Integrator {IntegratorOption}
<Parameters> |
Add RKV89Efficient integration method. |
10 |
| HeightAboveGround_R
|
HeightAboveGround_R <ObjectPath> |
Add Place as a valid object. |
10 |
| ImportAlmanacFile
|
ImportAlmanacFile <ScenarioPath> "<FilePath>" ID
{All | <IDNumber>} [{ImportOption} <Value> ...] |
Update time options. |
10 |
| ImportFromDB
|
ImportFromDB <ScenarioPath> {Type} {Source} [{Options}]
{SearchParameters} |
Update time options, added Place object to Class option. |
10 |
| ImportTLEFile
(Satellites) |
ImportTLEFile <ScenarioPath> "<FilePath>"
[{ImportOption} <Value> {ImportOption} <Value>...] |
Update time options. |
10 |
| InitialState
|
InitialState <ObjectPath> {Import | Export} {Source}
["<FilePath>"] [{Options}] |
Update IIRV1 and IIRV9 Export values. Update time options. |
10 |
| LaserCAT
|
LaserCAT <ObjectPath> {AvoidanceOptions}
<Parameters> |
Update time options. |
10 |
| LaunchWindow
|
LaunchWindow <ObjectPath> {Option} |
New command. |
10 |
| LaunchWindow_RM
|
LaunchWindow_RM <ObjectPath> Range <RangeVal> |
New command. |
10 |
| Lighting
|
Lighting <ScenarioPath> {LightingType}
{DisplayOptions} |
New command. |
10 |
| Lighting Penumbra
|
Lighting <ScenarioPath> Penumbra {DisplayOption}
<Value> [{DisplayOption} <Value> ...] |
Replaced this command with Lighting UmbraPenumbra. |
10 |
| Lighting Sunlight
|
Lighting <ScenarioPath> Sunlight {DisplayOption}
<Value> [{DisplayOption2} <Value2> ... ] |
Replaced this command with Lighting Day. |
10 |
| Lighting Umbra
|
Lighting <ScenarioPath> Umbra {DisplayOption}
<Value> [{DisplayOption} <Value> ...] |
Replaced this command with Lighting UmbraPenumbra. |
10 |
| MapAnnotation Add
|
MapAnnotation <ScenarioPath> Add <AnnotNum>
{AnnotType} [<Parameters>] |
Add FillTranslucency option. |
10 |
| MapAttribs
|
MapAttribs <ScenarioPath> {AttributeType} {Attribute}
{State} [<Color>] |
Add TextTranslucency and BackgroundTranslucency options. |
10 |
| Missile
|
Missile <ObjectPath> Trajectory {TimeValue}
<StepSize> {LaunchOption} <LaunchParameters>
{TrajOption} <Value> {ImpactOption}
<ImpactParameter> |
Update time options. |
10 |
| OnLineOperations
|
OnlineOperations <ApplicationPath> {Options} |
Add UseHTTPPersistantConn and UseSecureHTTPConn options. Add
AutoFindClientCertificate and ClearClientCertificates options. |
10 |
| OnePointAccess
|
OnePointAccess <FromObjectPath> <ToObjectPath>
{ComputeOption} [{SummaryOption}] [{TimeInterval}
[<StepSize>]] [OutputFile "<FilePath>"] |
Update time options. |
10 |
| OrbitWizard
|
OrbitWizard <VehObjectPath> {Type} [{Options}] |
New command. |
10 |
| PassBreak
(Satellites) |
PassBreak <SatObjectPath> {PassOption}
[<Parameters>] |
Update time options. |
10 |
| Point Schedule
|
Point <SensorObjectPath> Schedule {ScheduleOption}
[<MethodData>] |
Update time options. |
10 |
| Position
(Facility, Place, Target & Area Target) |
Position <ObjectPath> [{Type}] [{TimeValue}] |
Add Place object. |
10 |
| Position (Vehicles) |
Position <ObjectPath> [{TimeValue}] |
Update time options. |
10 |
| Position_RM
|
Position_RM <MTOObjectPath> {PosOptions} |
Update time options. |
10 |
| Propagate
|
Propagate <SatObjectPath> [{TimeInterval}] |
Update time options. |
10 |
| Prune
|
Prune <ObjectPath> {PruneOption} <Parameters> |
Update time options. |
10 |
| QuickReportAdd
|
QuickReportAdd <ScenarioPath> Name
"<QuickReportName>" Type {RptType} Style "<StyleName>"
Object <TruncObjPath> [FromObject <TruncObjPath>] |
New command. |
10 |
| RFI
|
RFI <ObjectPath> {RFIOption} <Parameters> |
Update time options. |
10 |
| Range_RM
|
Range_RM <MTOObjectPath> Object <ObjectPath>
{RangeOptions} |
Update time options. Add Place object. |
10 |
| ReportCreate
|
ReportCreate <ObjectPath> ({Option}
<Value>)... |
Update time options. |
10 |
| Report_RM
|
Report_RM <ObjectPath> ({Option} <Value>)... |
Update time options. |
10 |
| SEET Radiation
(Vehicle) |
SEET <VehiclePath> Radiation {RadOptions} |
Add DoseIntegrationStep and DoseReportStep options. |
10 |
| SetAnalysisTimePeriod
|
SetAnalysisTimePeriod <ScenarioPath> {TimeInterval} |
Update time options. |
10 |
| SetAnimation
|
SetAnimation <ScenarioPath> {AnimateOption}
<Parameters> |
Update time options. |
10 |
| SetAttitude Target
|
SetAttitude <VehicleObjectPath> Target {TargetOption}
[<Parameters>] |
This command is now valid for Satellites, LaunchVehicles, and
Missiles. Add Import and Slew options. |
10 |
| SetAzElMask (Facility,
Place & Target) |
SetAzElMask <ObjectPath> {UseOption}
["<FilePath>"] |
Add Place object. |
10 |
| SetConstraint
(Facility, Place & Target) |
SetConstraint <ObjectPath> {ConstraintName}
<Parameters> |
Add Place object. |
10 |
| SetConstraint
(Sensor) |
SetConstraint <SensorObjectPath> {ConstraintName}
<Parameters> |
Add Place object. |
10 |
| SetGreatArcStart
|
SetGreatArcStart <ObjectPath> {TimeValue} |
Update time options. |
10 |
| SetHeightAboveGround
|
SetHeightAboveGround <ObjectPath> <Height> |
Add Place object. |
10 |
| SetPosition
(Facility, Place, Target & Area Target) |
SetPosition <ObjectPath> [{Type}] {CoordType}
<Parameters> |
Add Place object. |
10 |
| SetPosition
(Vehicles) |
SetPosition <ObjectPath> {PositionType} {TimeValue}
<PositionData> |
Update time options. |
10 |
| SetPositionCov
|
SetPositionCov <VehObjectPath> [{PositionType}]
{TimeValue} [<PositionData>] {CovarianceType}
<CovarianceData> |
Update time options. |
10 |
| SetPropagator File
|
SetPropagator <ObjectPath> File {Propagator}
"<FilePath>" [{NoProp | {TimeInterval}}] |
Update time options. |
10 |
| SetState
|
SetState <VehiclePath> {Method} <Parameters> |
Add 11Parameter method option. |
10 |
| SetState (Missile) |
SetState <MissileObjectPath> {CoordinateType} TwoBody
{TimeInterval} <StepSize> {CoordSystem} "<OrbitEpoch>"
<CoordTypeParameters> ["<CoordEpoch>"] |
Update time options. |
10 |
| SetSwath
|
SetSwath <SensorObjectPath> {Options} |
Update time options; add ComputationalMethod option. |
10 |
| SetTerrainNormal
|
SetTerrainNormal <ObjectPath> {SurfaceNormal | Manual
{Option} <Parameters>} |
Add Place object. |
10 |
| Surveillance
|
Surveillance <ObjectPath> {SurveillanceOptions}
<Parameters> |
Add Place object. |
10 |
| TimeTool Interval
|
TimeTool <ScenarioPath> <ParentObject> {Action}
{"Interval" | "IntervalTemplate"} <ComponentName>
[{IntervalType} <TypeParams>] |
Add time tool component types. |
10 |
| TimeTool Time Instant
|
TimeTool <ScenarioPath> <ParentObject> {Action}
{"Time Instant" | "Time InstantTemplate"} <ComponentName>
[{TimeInstantType} <TypeParams>] |
Add time tool component types. |
10 |
| TimeTool_R
|
TimeTool_R <ScenarioPath> {Option}
[<Parameters>] |
New command. |
10 |
| Transmitter
|
Transmitter <XmObjectPath> {Option} <AttributePath>
[<Value>] [<Unit>] |
Describe updated attribute names. |
10 |
| Transmitter_RM
|
Transmitter_RM <ObjectPath> GetValue
[<AttributePath>] |
Describe updated attribute names. |
10 |
| UseTerrain
|
UseTerrain <ObjectPath> {UseOption} |
Add Place object. |
10 |
| VO AddArticulation
|
VO <ObjectPath> AddArticulation {ArticulateOptions} |
Update time options. Add Place object. Add Force and
AutoStartValue options. |
10 |
| VO AdvCATAttributes
|
VO <AdvCATObjPath> AdvCATAttributes {DisplayOption}
<Value> [{DisplayOption} <Value>...] |
Add Show option. |
10 |
| VO Annotation
|
VO <ScenarioPath> Annotation {AnnotationAction}
<Parameters> |
Add Interval Import option. |
10 |
| VO Area
|
VO <ObjectPath> Area {AreaOption} <Parameters> |
Update time options. |
10 |
| VO AttCovAttributes
|
VO <AttCovObjectPath> AttCovAttributes {Show {On | Off} |
{AttCovOptions}} |
Add AutoGranularity and Show option. |
10 |
| VO AttFOMAttributes
|
VO <AttFOMObjectPath> AttFOMAttributes {Show {On | Off} |
{AttFOMOptions}} |
Add Show option. |
10 |
| VO AttFOMContours
|
VO <AttFOMObjectPath> AttFOMContours {GfxType}
{ContourOption} [<Parameters>] |
Add ShowUpToMaxOnly option. |
10 |
| VO AttitudeView
|
VO <ObjectPath> AttitudeView {AttitudeViewOption}
<Parameters> |
Add Place object. |
10 |
| VO AzElMaskTool
|
VO <SensorObjectPath> AzElMaskTool {AzElOption} |
Update time options. |
10 |
| VO BorderWall
|
VO <ObjectPath> BorderWall {BorderWallOption}
<Value> [{BorderWallOption} <Value>...] |
Add Place object. |
10 |
| VO CameraControl
|
VO <ScenarioPath> CameraControl {CameraOptions} |
Update time options. |
10 |
| VO ControlBox
|
VO <VehObjectPath> ControlBox {Keyword} <Value>
[{Keyword} <Value>...] |
Add RefFrame keyword and update the keywords for setting the
control box dimensions. |
10 |
| VO CovAttributes
|
VO <ObjectPath> CovAttributes {DisplayOption}
<Value> [{DisplayOption} <Value>...] |
Add AutoGranularity, ShowAtAltitude and DrawAtAltMode
options. |
10 |
| VO
CovarPointContours
|
VO <VehObjectPath> CovarPointContours {CovarOption}
<Parameters> |
Add Intervals Import option. |
10 |
| VO Covariance
|
VO <VehObjectPath> Covariance {CovarOption}
<Parameters> |
Add Intervals Import option. |
10 |
| VO Ellipsoid
|
VO <VehObjectPath> Ellipsoid {Keyword} <Value>
[{Keyword} <Value>...] |
New command. |
10 |
| VO FOMAttributes
|
VO <ObjectPath> FOMAttributes {DisplayOption}
<Value> [{DisplayOption} <Value>...] |
The Granularity, TempFilesDir and PixelsPerDeg options are no
longer valid. |
10 |
| VO ImageSetDef
|
VO <ScenarioPath> ImageSetDef {Action}
{ImageSetOptions} |
Update time options. |
10 |
| VO Lighting
|
VO <ScenarioPath> Lighting {LightOption}
[<Parameter>] |
Add Flashlight option. |
10 |
| VO Model
|
VO <ObjectPath> Model {Option1} <Value1> [{Option2}
<Value2>]... |
Add Place object; add IgnoreBoundRadius option. |
10 |
| VO ModelList
|
VO <ObjectPath> ModelList {ModelOption}
[<Parameters>] |
Update time options. |
10 |
| VO ObjectLine
|
VO <ScenarioPath> ObjectLine {Action} {FromObj
<TruncObjectPath1>} {ToObj <TruncObjectPath2>}
[{LineOptions}] |
Add ImportIntervals option. |
10 |
| VO PruneArtic
|
VO <ObjectPath> PruneArtic {PruneOption} |
Update time options. |
10 |
| VO ReloadArticFile
|
VO <ObjectPath> ReloadArticFile |
Add Place object. |
10 |
| VO
SaveArticStateAsDef
|
VO <ObjectPath> SaveArticStateAsDef {On | Off} |
New command. |
10 |
| VO ScaleModel
|
VO <ObjectPath> ScaleModel <ScaleFactor> |
Add Place object. |
10 |
| VO
SetDefaultCameraPos
|
VO <ScenarioPath> SetDefaultCameraPos <ObjectClass>
<Azimuth> <Elevation> |
New command. |
10 |
| VO
SetModelColorToObjColor
|
VO <ObjectPath> SetModelColorToObjColor {On | Off} |
New command. |
10 |
| VO SolarPanel
|
VO <ObjectPath> SolarPanel {CommandOption} |
Update time options. |
10 |
| VO
UseSmoothTransition
|
VO <ScenarioPath> UseSmoothTransition {On | Off} |
New command. |
10 |
| VO
UseStoredViewImageSets
|
VO <ScenarioPath> UseStoredViewImageSets {On | Off} |
New command. |
10 |
| VO VaporTrail
|
VO <ObjectPath> VaporTrail {Keyword} <Value>
[{Keyword} <Value>...] |
Update time options. Add Place object. |
10 |
| VO
WaypointAttributes
|
VO <VehObjectPath> WaypointAttributes {WaypointOptions}
({GfxOption} <Parameter>)... |
Update time options. |
10 |
| VO WindowState
|
VO <ObjectPath> WindowState {Options} |
Newly documented command. |
10 |
| VectorTool Angle
|
VectorTool <ScenarioPath> <ParentObject> {Action}
{Angle | AngleTemplate} <AngleName> [{AngleType}
<AngleTypeParams>] |
Update vector tool component types. |
10 |
| VectorTool Plane
|
VectorTool <ScenarioPath> <ParentObject> {Action}
{Plane | PlaneTemplate} <PlaneName> [{PlaneType}
<PlaneTypeParams>] |
Update vector tool component types. |
10 |
| VectorTool System
|
VectorTool <ScenarioPath> <ParentObject> {Action}
{System | SystemTemplate} <SystemName> [{SystemType}
<SystemTypeParams>] |
Update vector tool component types. |
10 |
| Visibility_RM
|
Visibility_RM <MTOObjectPath> Object <ObjectPath>
{VisOptions} |
Update time options. Add Place object. |
10 |
| Window2D
|
Window2D <ScenarioPath> {2DGfxWinOption} <Value>
[WindowID <WinNumber>] |
Add InpDevMode EnablePanMode option. |
10 |
| Zoom
|
Zoom <ScenarioPath> {ZoomOption} [<Parameters>]
[<WinNumber>] |
Add InlayImage option. |
10 |
| Command |
Format |
Description |
Version |
| ACAT Probability
|
ACAT <AdvCatObjPath> Probability {Parameters} |
New command. |
9.0 |
| ACATEvents_RM
|
ACATEvents_RM <AdvCatObjPath> [{Options}] |
New command. |
9.0 |
| Antenna
|
Antenna <AntObjectPath> {Options} <AttributePath>
[<Value>] [<Unit>] |
New command. |
9.0 |
| Antenna_RM
|
Antenna_RM <AntObjectPath> GetValue
[<AttributePath>] |
New command. |
9.0 |
| Atmosphere
|
Atmosphere <ObjectPath> SetValue <AttributePath>
<Value> [<Unit>] |
New command. |
9.0 |
| Atmosphere (Comm
& Radar) |
Atmosphere <ObjectPath> {AtmosphericModel} |
Replaced this command with a new version of Environment
command. |
9.0 |
| Atmosphere_RM
|
Atmosphere_RM <ObjectPath> GetValue
[<AttributePath>] |
New command. |
9.0 |
| AttCov Grid
|
AttCov <AttCovObjectPath> Grid {GridOption}
<Parameters> |
Command format modified to match updated UI. |
9.0 |
| CheckIsAppBusy
|
CheckIsAppBusy <ApplicationPath> |
New command. |
9.0 |
| Comm Antenna
|
Comm <CommObjectPath> Antenna [MultiBeam <BeamID>]
{AntennaType} <Parameters> |
Replaced this command with Antenna, Receiver and Transmitter
commands. |
9.0 |
| Comm CommSystem
SaveLevel
|
Comm <CommSysObjectPath> CommSystem SaveLevel
{SaveOptions} |
This command has become obsolete. |
9.0 |
| Comm Define
(Receiver) |
Comm <RcObjectPath> Define RcvrModel {ModelType}
<Parameters> |
Replaced this command with Receiver. |
9.0 |
| Comm Define
(Transmitter) |
Comm <XmObjectPath> Define XmtrModel {XmType} {ModelType}
<Parameters> |
Replaced this command with Transmitter. |
9.0 |
| Comm Filter
|
Comm <CommObjectPath> Filter {On | Off | Define}
[{FilterType} <UpperBandLimit> <LowerBandLimit>
<InsertionLoss> {AdditionalParams}] |
Replaced this command with Receiver and Transmitter
commands. |
9.0 |
| Comm GainLoss
|
Comm <ObjectPath> GainLoss [{PreReceive | PreDemod}]
{ListOptions} |
Replaced this command with Receiver and Transmitter
commands. |
9.0 |
| Comm Modulation
(Transmitter) |
Comm <XmObjectPath> Modulation {ModulationOptions} |
Replaced this command with Transmitter. |
9.0 |
| Comm Orient
|
Comm <CommObjectPath> Orient [MultiBeam <BeamID>]
{Orientation} <Parameters> |
Replaced this command with Antenna, Receiver and Transmitter
commands. |
9.0 |
| Comm Polarize
|
Comm <ObjectPath> Polarize [MultiBeam <BeamID>]
{PolarizationParams} |
Replaced this command with Antenna, Receiver and Transmitter
commands. |
9.0 |
| Comm RainModel
(Receiver) |
Comm <CommObjectPath> RainModel {State}
[<Outage>] |
Replaced this command with Receiver. |
9.0 |
| Comm SysTemp
(Receiver) |
Comm <ObjectPath> SysTemp {SystemOption}
<Parameters> |
Replaced this command with Receiver. |
9.0 |
| Comm
TransferFunc (Transmitter) |
Comm <XmObjectPath> TransferFunc {CoeffType}
<Value1> [<Value2>...] |
Replaced this command with Transmitter. |
9.0 |
| CommQuery
|
CommQuery <CommObjectPath> [{QueryType}] |
Replaced this command with Receiver_RM and Transmitter_RM
commands. |
9.0 |
| ConControl
|
ConControl <ApplicationPath> {ConControlOption} |
Add WildcardIgnoreNackOn, WildcardIgnoreNackOff options. |
9.0 |
| Define (Planet) |
Define <PlanetObjectPath> {Method}
<Parameters> |
JPL option now uses DE421 database. |
9.0 |
| Environment
|
Environment <ScenarioPath> SetValue <AttributePath>
<Value> [<Unit>] |
New command. |
9.0 |
| Environment (Comm
& Radar) |
Environment <ScenarioPath> {EnvironmentOption} |
Replaced this command with a new version of Environment
command. |
9.0 |
| Environment_RM
|
Environment_RM <ScenarioPath> GetValue
[<AttributePath>] |
New command. |
9.0 |
| GetDB
|
GetDB <ApplicationPath> |
Replaced this command with GetDirectory. |
9.0 |
| GetDefaultDir
|
GetDefaultDir <ApplicationPath> |
Replaced this command with GetDirectory. |
9.0 |
| GetSTKHomeDir
|
GetSTKHomeDir <ApplicationPath> |
Replaced this command with GetDirectory. |
9.0 |
| GetScenPath
|
GetScenPath <ScenarioPath> |
Replaced this command with GetDirectory. |
9.0 |
| GetUserDir
|
GetUserDir <ApplicationPath> |
Replaced this command with GetDirectory. |
9.0 |
| Graphics
ExtEphemPoints
|
Graphics <VehObjectPath> ExtEphemPoints {On | Off} |
Command documented. |
9.0 |
| Graphics ImageInlay
|
Graphics <ScenarioPath> ImageInlay "<FilePath>"
{ImageOption} <Value> [{ImageOption} <Value>...] |
Removed obsolete txm and txb references. |
9.0 |
| Graphics Label
|
Graphics <ObjectPath> Label {Options} |
Add option for user to specify the label text. |
9.0 |
| Graphics SetLabel
|
Graphics <ObjectPath> SetLabel "<Label Text>" |
Replaced this command with Graphics Label. |
9.0 |
| Graphics
UseInstNameLabel
|
Graphics <ObjectPath> UseInstNameLabel |
Replaced this command with Graphics Label. |
9.0 |
| GroundEllipse_R
|
GroundEllipse_R <VehObjectPath> {GetAllSets
[IncludeEmptySets] | GetSetEllipses <SetName>} |
Added IncludeEmptySets option. |
9.0 |
| HPOP Options
|
HPOP <ObjectPath> Options {ForceModelOption}
<ModelParameters> |
Add GeoMagFluxSource option. |
9.0 |
| HideBrowser
|
HideBrowser <ApplicationPath> |
This command is not new but has not been documented prior to
STK 9. |
9.0 |
| Location
|
Location <SensorObjectPath> {LocationType}
<Parameters> |
New Point option. |
9.0 |
| MapDetails
|
MapDetails <ScenarioPath> {DetailOption}
<Parameters> |
Add Clouds URI Option. |
9.0 |
| OpenHtmlViewer
|
OpenHtmlViewer <ApplicationPath>
["<HtmlPage>"] |
New command. |
9.0 |
| PatternTool
|
PatternTool <SensorObjectPath> "<DateTime>"
"<FilePath>" {Method} <Parameters> |
Add AreaTarget option. |
9.0 |
| Point 3DModel
|
Point <SensorObjectPath> 3DModel <AttachPoint> |
New command. |
9.0 |
| Point Targeted
|
Point <SensorObjectPath> Targeted {OrientMethod}
<MethodData> |
Add Load option to Target Times; add SaveAccesses option. |
9.0 |
| Receiver
|
Receiver <RcObjectPath> {Options} <AttributePath>
[<Value>] [<Unit>] |
New command. |
9.0 |
| Receiver_RM
|
Receiver_RM <RcObjectPath> GetValue
[<AttributePath>] |
New command. |
9.0 |
| Reference
|
Reference <SatObjectPath> SetRefSatellite
<SatObjectPath> |
Command documented. |
9.0 |
| SavePreferences
|
SavePreferences <ApplicationPath> {SaveOption}
<Parameters> |
Add SnTgtAccesses option. |
9.0 |
| SetEpoch
|
SetEpoch <ScenarioPath> {"<EpochTime>" |
UseAnalysisStartTime} |
Add UseAnalysisStartTime option. |
9.0 |
| SetInterplanetaryMode
|
SetInterplanetaryMode <ApplicationPath> {On | Off} |
Command documented. |
9.0 |
| SetPropSpecific
|
SetPropSpecific <SatObjectPath> {PropOption}
<Parameter> |
Add PropagationFrame option. |
9.0 |
| SetPropagatorDefaults
|
SetPropagatorDefaults <ApplicationPath> {Propagator}
{PropOptions} |
New command. |
9.0 |
| SetTimePeriod
|
SetTimePeriod <ScenarioPath> "<StartTime>"
"<StopTime>" |
This command has been replaced with SetAnalysisTimePeriod. |
9.0 |
| ShowBrowser
|
ShowBrowser <ApplicationPath> |
This command is not new but has not been documented prior to
STK 9. |
9.0 |
| TLEFileOptions
|
TLEFileOptions <SatObjectPath> (AddFile
"<FilePath>")... |
New command. |
9.0 |
| TLESwitchMethod
|
TLESwitchMethod <SatObjectPath> {Epoch | Midpoint | TCA |
Override "<OverrideTime>" | Disable}
[<ElSetNumber>] |
Override Switch method can not be applied to the first el set;
Disable can not be applied to All el sets. |
9.0 |
| VO Attributes
(Scenario) |
VO <ScenarioPath> Attributes {AttributeOption}
<Parameters> [<WinNumber>] |
Add Clouds Auto and URI Options. |
9.0 |
| VO LightSource
|
VO <ScenarioPath> LightSource {Add | Delete | Modify |
DeleteAll} [{LightOption} <Parameter>]... |
Add attenuation options. |
9.0 |
| VO Marker
|
VO <ObjectPath> Marker ({MarkerOption}
<value>)... |
Add RotateForVelocity and RotateFromNorth options. |
9.0 |
| VO Pass
|
VO <ObjectPath> Pass {LeadTrailOption}
<Parameters> |
Replaced this command with VO Pass3D and VO Frame. |
9.0 |
| VO Pass3D
|
VO <ObjectPath> Pass3D {LeadTrailOption}
<Parameters> |
New command that replaces VO Pass command. |
9.0 |
| VO TickMarks
|
VO <ObjectPath> TickMarks ({TickOption}
<Parameters>)... |
New command. |
9.0 |
| VO_R Overlays
|
VO_R <ScenarioPath> Overlays [<WinNumber>] |
New command. |
9.0 |
| VO_R StoredViewNames
|
VO_R <ScenarioPath> StoredViewNames [<WinNumber> |
All] |
Add the All option. |
9.0 |
| Walker (Satellites) |
Walker <SatObjectPath> [{WalkerType}] <NumPlanes>
<NumSatsPerPlane> {<InterPlaneSpacing> |
<TrueAnomaly>} <RAANSpread> {ColorByPlaneFlag}
[{AdditionalOptions}] |
Add SetUniqueNames option. |
9.0 |
| Window2D_R
|
Window2D_R <ScenarioPath> {DataType} {DataTypeOptions}
[WindowId <WinNumber>] |
Add Property options. |
9.0 |
| Window3D_R
|
Window3D_R <ScenarioPath> {WindowOption} [WindowID
<WinNumber>] |
New command. |
9.0 |